Page:A Book of Dartmoor.djvu/161

From Wikisource
Jump to navigation Jump to search
This page has been validated.
JAPANESE METHODS
119

The furnace employed for copper is also described by Mr. Gowland:—


"An excavation, measuring about 4 feet long, 4 feet wide, and 2 feet deep, is made, and this is filled with dry clay carefully beaten down. In the centre of this bed of clay a shallow, conical-shaped hole is scooped out. The hole is

Smelting Tin in Japan.

then lined with a layer, about three inches thick, of damp clay mixed with charcoal, and the furnace is complete.

"It has no apertures either for the injection of the blast or for tapping out the metal. A blast of air is supplied to it generally from two bellows, placed behind a wall of wattle well coated with clay, by which they and the men working them are protected from the heat. The blast is led from each bellows by a bamboo tube, terminating in a very long nozzle of clay, which rests on the edge of the furnace cavity."