From data of this kind the temperature of a furnace may be determined by means of an observation of the resistance of a platinum wire placed in the furnace.
Dr. Matthiessen found that when two metals are combined to form an alloy, the resistance of the alloy is in most cases greater than that calculated from the resistance of the component metals and their proportions. In the case of alloys of gold and silver, the resistance of the alloy is greater than that of either pure gold or pure silver, and, within certain limiting proportions of the constituents, it varies very little with a slight alteration of the proportions. For this reason Dr. Matthiessen recommended an alloy of two parts by weight of gold and one of silver as a material for reproducing the unit of resistance.
The effect of change of temperature on electric resistance is generally less in alloys than in pure metals.
Hence ordinary resistance coils are made of German silver, on account of its great resistance and its small variation with temperature.
An alloy of silver and platinum is also used for standard coils.
361.] The electric resistance of some metals changes when the metal is annealed; and until a wire has been tested by being repeatedly raised to a high temperature without permanently altering its resistance, it cannot be relied on as a measure of resistance. Some wires alter in resistance in course of time without having been exposed to changes of temperature. Hence it is important to ascertain the specific resistance of mercury, a metal which being fluid has always the same molecular structure, and which can be easily purified by distillation and treatment with nitric acid. Great care has been bestowed in determining the resistance of this metal by W. and C. F. Siemens, who introduced it as a standard. Their researches have been supplemented by those of Matthiessen and Hockin.
The specific resistance of mercury was deduced from the observed resistance of a tube of length containing a weight of mercury, in the following manner.
No glass tube is of exactly equal bore throughout, but if a small quantity of mercury is introduced into the tube and occupies a length of the tube, the middle point of which is distant from one end of the tube, then the area of the section near this point will be where is some constant.
