Page:EB1911 - Volume 01.djvu/746

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
704
ALLOTROPY—ALLOYS
  

whole, and the number is bound to increase, since the incorporation of farms is illegal, while there is no obstacle to their division. Between 1835 and 1885, the number of small holdings of less than one töndekarthorn increased from 24,800 to 92,856. What gives point to these remarks is, that Denmark seems in the way to arrest its rural exodus, and was one of the first countries to escape from the agricultural depression due to the extraordinary fall in grain prices. The distribution of land in Denmark may be gathered from a glance at the preceding table for the compilation of which we are indebted to Major Craigie.

Authorities.—Walter of Henley’s Husbandry; The English Village Community, by Frederic Seebohm; Annals of Agriculture, by Arthur Young; The Agricultural Labourer, by E. Kebbel; Report on the Employment of Women and Children in Agriculture, 1867 (historical sketch by Messrs Tremenheere and Tufnall); A Study of Small Holdings, by W. E. Bear; The Law and the Labourer, by C. W. Stubbs; “Agricultural Holdings in England and Abroad,” by Major Craigie (Statistical Society’s Journal, vol. i.); The Return to the Land, by Senator Jules Méline; Land Reform, by the Right Hon. Jesse Collings, M.P.; Report on the Decline in the Agricultural Population of Great Britain, issued by the Board of Agriculture and Fisheries; Report of the Departmental Committee appointed by the Board of Agriculture and Fisheries to enquire into and report upon the subject of Small Holdings in Great Britain.  (P. A. G.) 


ALLOTROPY (Gr. ἄλλος, other, and τρόπος, manner), a name applied by J. J. Berzelius to the property possessed by certain substances of existing in different modifications. Custom has to some extent restricted its use to inorganic chemistry; the corresponding property of organic compounds being generally termed isomerism (q.v.). Conspicuous examples are afforded by oxygen, carbon, boron, silicon, phosphorus, mercuric oxide and iodide.


ALLOWANCE (from “allow,” derived through O, Fr. alouer from the two Lat. origins adlaudare, to praise, and allocare, to assign a place; so that the English word combined the general idea of “assigning with approval”), the action of allowing, or the thing allowed; particularly, a certain limited apportionment of money or food and diet (see Dietary).

In commercial usage “allowance” signifies the deduction made from the gross weight of goods to make up for the weight of the box or package, waste, breakages, &c. Allowance, which is customary in most industries, varies according to the trade, district or country; e.g. in the coal trade it is customary for the merchant to receive from the pit 21 cwts. of coal for every ton purchased by him, the difference of 1 cwt. being the allowance for the purpose of making good the waste caused through transhipment, screening and cartage (see Tare and Tret.)


ALLOXAN, or Mesoxalyl Urea, C4H2N2O4 or

CO NH—CO
NH—CO
CO.

an oxidation product of uric acid, being obtained from it by the action of cold nitric acid, C6H4N4O3 + H2O + O = C4H2N2O4 + CO(NH2)2. It crystallizes from water in colourless rhombic prisms, containing four molecules of water of crystallization, and possesses a very acid reaction. It serves as the starting-point for the preparation of many related substances. Zinc and hydrochloric acid in the cold convert it into alloxantin (q.v.), hydroxylamine gives nitroso-barbituric acid, C4H2N2O3:NOH, baryta water gives alloxanic acid, C4H4N2O5, hot dilute nitric acid oxidizes it to parabanic acid (q.v.), hot potassium hydroxide solution hydrolyses it to urea and mesoxalic acid (q.v.) and zinc and hot hydrochloric acid convert it into dialuric acid, C4H4N2O4. M. Nencki has shown that alloxan combines with thiourea in alcoholic solution, in the presence of sulphur dioxide to form pseudothiouric acid, C5H6N4SO3. Methyl and dimethylalloxans are also known, the former being obtained on oxidation of methyl uric acid, and the latter on oxidation of caffeine (q.v.).


ALLOXANTIN, C6H4N4O7.3H2O, a product obtained by the combination of alloxan and dialuric acid, probably possessing the constitution

NH—CO CO—NH
 |  |  | |
CO C(OH) —O— CH  CO
 |  |  | |
NH—CO CO—NH

one of the three molecules of water being possibly constitutional. It forms small hard prisms which become red on exposure to air containing ammonia, owing to the formation of murexide (ammonium purpurate), C6H4(NH4)N5O6. It may also be obtained by the action of sulphuretted hydrogen on alloxan. The tetra methyl derivative, amalic acid, C6(CH3)4N4O7, has been prepared by oxidizing caffeine (q.v.) with chlorine water, and forms colourless crystals which are only slightly soluble in hot water. The formation of murexide is used as a test for the presence of uric acid, which on evaporation with dilute nitric acid gives alloxantin, and by the addition of ammonia to the residue the purple red colour of murexide becomes apparent.


ALLOYS (through the Fr. aloyer, from Lat. alligare, to combine), a term generally applied to the intimate mixtures obtained by melting together two or more metals, and allowing the mass to solidify. It may conveniently be extended to similar mixtures of sulphur and selenium or tellurium, of bismuth and sulphur, of copper and cuprous oxide, and of iron and carbon, in fact to all cases in which substances can be made to mix in varying proportions without very marked indication of chemical action. The term “alloy” does not necessarily imply obedience to the laws of definite and multiple proportion or even uniformity throughout the material; but some alloys are homogeneous and some are chemical compounds. In what follows we shall confine our attention principally to metallic alloys.

If we melt copper and add to it about 30% of zinc, or 20% of tin, we obtain uniform liquids which when solidified are the well-known substances brass and bell-metal. These substances are for all practical purposes new metals. The difference in the appearance of brass and copper is familiar to everyone; brass is also much harder than copper and much more suitable for being turned in a lathe. Similarly, bell-metal is harder, more sonorous and more brittle than either of its components. It is almost impossible by mechanical means to detect the separate ingredients in such an alloy; we may cut or file or polish it without discovering any lack of homogeneousness. But it is not permissible to call brass a chemical compound, for we can largely alter its percentage composition without the substance losing the properties characteristic of brass; the properties change more or less continuously, the colour, for example, becoming redder with decrease in the percentage of zinc, and a paler yellow when there is more zinc. The possibility of continuously varying the percentage composition suggests analogy between an alloy and a solution, and A. Matthiessen (Phil. Trans., 1860) applied the term “solidified solutions” to alloys. Regarded as descriptive of the genesis of an alloy from a uniform liquid containing two or more metals, the term is not incorrect, and it may have acted as a signpost towards profitable methods of research. But modern work has shown that, although alloys sometimes contain solid solutions, the solid alloy as a whole is often far more like a conglomerate rock than a uniform solution. In fact the uniformity of brass and bell-metal is only superficial; if we adopt the methods described in the article Metallography, and if, after polishing a plane face on a bit of gun-metal, we etch away the surface layer and examine the new surface with a lens or a microscope, we find a complex pattern of at least two materials. Fig. 1 (Plate) is from a photograph of a bronze containing 23·3% by weight of tin. The acid used to etch the surface has darkened the parts richest in copper, while those richest in tin remained white. The two ingredients revealed by this process are not pure copper and pure tin, but each material contains both metals. In this case the white tin-rich portions are themselves a complex that can be resolved into two substances by a higher magnification. The majority of alloys, when examined thus, prove to be complexes of two or more materials, and the patterns showing the distribution of these materials throughout the alloy are of a most varied character. It is certain that the structure existing in the alloy is closely connected with the mechanical properties, such as hardness, toughness, rigidity, and so on, that make particular alloys valuable in the arts, and many efforts have been made to trace this connexion. These efforts have, in some cases, been very