Page:Miscellaneous Papers on Mechanical Subjects.djvu/116

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
102
NEW YORK INDUSTRIAL EXHIBITION.

The wheels are taken from the moulds, as soon after they are cast as they can bear moving without changing their form, and before they have become strained while cooling. In this state they are put into a circular furnace or chamber, which has been previously heated to a temperature about as high as that of the wheels when taken from the mould; as soon as they are deposited in this furnace or chamber, the opening through which they are passed is covered, and the temperature of the furnace and its contents is gradually raised to a point a little below that at which fusion commences. All the avenues to and from the interior of the furnace are then closed, and the whole mass is left to cool gradually as the heat permeates through the exterior wall, which is composed of fire-brick 4½ inches thick, inclosed in a circular case of sheet iron ⅛ inch thick.

By this process the wheel is raised to one temperature throughout before it begins to cool in the furnace, and, as the heat can only pass off through the medium of the wall, all parts of each wheel cool and contract simultaneously. The time required to cool a furnace full of wheels in this manner is about four days.

By this process wheels of any form, and of almost any proportions, can be made with a solid nave.