Adaptability
Styles 80 and 81, Spirella bust confiners, are designed for full figures with low bust, having from 12 to 16 inch development. Confine the bust and control excessive flesh under the arm and on the upper back. Surplice front permits free adaptation to variations in waist curve. Especially designed to be worn with extremely low bust corsets. Illustration on opposite page shows style 80.
Description
These garments are regularly made of light, strong, white batiste. Fasten in front at the upper part with three buttons. Lower front is controlled by means of surplice and tapes which tie in front. Back beautifully curved so as to cling closely to the figure. Front shaped by means of bias seams boned with narrow Spirella. Trimmed with handsome edging at top and around armhole. Draw-tape in edging.
Style 80, with proper selection, will care for a figure with development from 12 to 16 inches. Length of under arm 6 inches. Depth of back 7½ inches.
Style 81, with proper selection, will care for a figure with development from 14 to 16 inches. Like style 80 in every respect, except that it is one inch longer all around the bottom.
Standard sizes 32 to 50 inclusive. Larger or smaller sizes, Special. Not made in other materials except as a full Custom garment. In ordering special sizes or other materials than the garments are regularly made in, fill out Special and Custom Order Blank for Spirella bust confiners.
Adjustment
Fasten the buttons at the front of the yoke, take deep breath, lift the chest as high as possible, then draw the points of the confiner snugly under the bust, cross the strings in the back and tie in front. The confiner will fit snugly and smoothly at every point. For measurements and selection of sizes, see booklet "How to Take Measurements'. For materials and prices, see price list.
Spirella Bust Confiner
Style 80
(For additional style of this series see "Description" on opposite page)
