Page:SpirellaCorsets1913page5.jpg

From Wikisource
Jump to navigation Jump to search
This page has been validated.


Style 321


Styles 320 and 321 are intended for slender, willowy figures such as figures 1 and 2 in the instructions "How to Select the Proper Corset." [See pages 20 to 24.] Style 320 is adapted to the flat bony figure of these types, and style 321 to the round figure of the same general type. Particularly suitable for the youthful undeveloped figure. A bust confiner should be worn with style 321 as the bust of the corset is too low to control the usual bust development of the figure for which it is adapted. Made in a variety of materials, suitably trimmed. Should be worn with four hose supporters.

Medium length. Boned with the guaranteed Spirella, so placed as to avoid pressure over hip bone. Draw-tape in bust. Style 320 is longer above the waist than style 321 which is illustrated. In both styles the bust measure is 11 inches greater than the waist measure. In style 320 the hip measure is 11 inches greater than the waist measure; in style 321 only 10 inches greater.

Regular sizes 18 to 26. If larger or smaller sizes are desired, a small extra charge will be made.

page five