PUBLIC LAW 99-514—OCT. 22, 1986
100 STAT. 2151
least $5,000,000 of the cost of which was incurred before September 26, 1985, (iv) the project, which involves the expansion of an existing service facility and the addition of new lab facilities needed to accommodate topcoat and undercoat production needs of a nearby automotive assembly plant, was approved by the corporation's management committee on March 5, 1986, or (v) the project is part of a facility to consolidate and modernize the silica production of such corporation and the project was approved by the president of such corporation on August 19, 1985. (F) A project is described in this subparagraph if— (i) such project involves a port terminal and oil pipeline extending generally from the area of Los Angeles, California, to the area of Midland, Texas, and (ii) before September 26, 1985, there is a binding contract for dredging and channeling with respect thereto and a management contract with a construction manager for such project. (G) A project is described in this subparagraph if— (i) the project is a newspaper printing and distribution plant project with respect to which a contract for the purchase of 8 printing press units and related equipment to be installed in a single press line was entered into on January 8, 1985, and (ii) the contract price for such units and equipment represents at least 50 percent of the total cost of such project. (H) A project is described in this subparagraph if it is the second phase of a project involving direct current transmission lines spanning approximately 190 miles from the United States-Canadian border to Ayer, Massachusetts, alternating current transmission lines in Massachusetts from Ayers to Millbury to West Medway, DC-AC converted terminals to Monroe, New Hampshire, and Ayer, Massachusetts, and other related equipment and facilities. (I) A project is described in this subparagraph if it involves not more than two natural gas-fired combined cycle electric generating units each having a net electrical capability of approximately 233 megawatts, and a sales contract for approximately one-half of the output of the 1st unit was entered into in December 1985. (J) A project is described in this subparagraph if— (i) the project involves an automobile manufacturing facility (including equipment and incidental appurtenances) to be located in the United States, and (ii) either— (I) the project was the subject of a memorandum of understanding between 2 automobile manufacturers that was signed before September 25, 1985, the automobile manufacturing facility (including equipment and incidental appurtenances) will involve a total estimated cost of approximately $750,000,000, and will have an annual production capacity of approximately 240,000 vehicles or
�
