121 STAT. 588
PUBLIC LAW 110–69—AUG. 9, 2007
dkrause on GSDDPC44 with PUBLAW
addressed the deficiencies identified by the panel, or shown a significant improvement in its performance, the Director shall conduct a new competition to select an operator for the Center or may close the Center.’’ after ‘‘at declining levels.’’. (c) FEDERAL SHARE.—Section 25 of the National Institute of Standards and Technology Act (15 U.S.C. 278k) is amended by striking subsection (d) and inserting the following: ‘‘(d) ACCEPTANCE OF FUNDS.— ‘‘(1) IN GENERAL.—In addition to such sums as may be appropriated to the Secretary and Director to operate the Centers program, the Secretary and Director also may accept funds from other Federal departments and agencies and under section 2(c)(7) from the private sector for the purpose of strengthening United States manufacturing. ‘‘(2) ALLOCATION OF FUNDS.— ‘‘(A) FUNDS ACCEPTED FROM OTHER FEDERAL DEPARTMENTS OR AGENCIES.—The Director shall determine whether funds accepted from other Federal departments or agencies shall be counted in the calculation of the Federal share of capital and annual operating and maintenance costs under subsection (c). ‘‘(B) FUNDS ACCEPTED FROM THE PRIVATE SECTOR.— Funds accepted from the private sector under section 2(c)(7), if allocated to a Center, shall not be considered in the calculation of the Federal share under subsection (c) of this section.’’. (d) MEP ADVISORY BOARD.—Such section 25 is further amended by adding at the end the following: ‘‘(e) MEP ADVISORY BOARD.— ‘‘(1) ESTABLISHMENT.—There is established within the Institute a Manufacturing Extension Partnership Advisory Board (in this subsection referred to as the ‘MEP Advisory Board’). ‘‘(2) MEMBERSHIP.— ‘‘(A) IN GENERAL.—The MEP Advisory Board shall consist of 10 members broadly representative of stakeholders, to be appointed by the Director. At least 2 members shall be employed by or on an advisory board for the Centers, and at least 5 other members shall be from United States small businesses in the manufacturing sector. No member shall be an employee of the Federal Government. ‘‘(B) TERM.—Except as provided in subparagraph (C) or (D), the term of office of each member of the MEP Advisory Board shall be 3 years. ‘‘(C) CLASSES.—The original members of the MEP Advisory Board shall be appointed to 3 classes. One class of 3 members shall have an initial term of 1 year, one class of 3 members shall have an initial term of 2 years, and one class of 4 members shall have an initial term of 3 years. ‘‘(D) VACANCIES.—Any member appointed to fill a vacancy occurring prior to the expiration of the term for which his predecessor was appointed shall be appointed for the remainder of such term. ‘‘(E) SERVING CONSECUTIVE TERMS.—Any person who has completed two consecutive full terms of service on the MEP Advisory Board shall thereafter be ineligible for
VerDate Aug 31 2005
13:52 Jan 23, 2009
Jkt 059194
PO 00001
Frm 00586
Fmt 6580
Sfmt 6581
M:\STATUTES\2007\59194PT1.001
APPS10
PsN: 59194PT1
�
