86
STAT.]
PUBLIC LAW92-513-OCT. 20, 1972
(c) Section 403(a)(5) of such Act is amended to read as follows: " (5) in the case of any State, an amount equal to 50 per centum of the total amount expended under the State plan during such quarter as emergency assistance to needy families with children." (d) Sections 3(a), 403(a), 1003(a), 1403(a), and 1603(a), of such Act are amended, in the matter preceding paragraph (1) of each such section, by striking out "shall pay" and inserting in lieu thereof "shall (subject to section 1130) pay". (e) The amendments made by this section (other than by subsection (b)) shall be effective July 1, 1972, and the amendments made by subsection (b) shall be effective January 1, 1973. Approved October 20, 1972.
947 81 Stat. 893. 42 USC 603.
42 USC 303, 1203, 1353, 1383, Ante, p. 945. Effective dates..
Public Law 92-513 AN ACT October 20, 1972 [S. 976] To promote competition among motor vehicle manufacturers in the design and production of safe motor vehicles having greater resistance to damage, and for other purposes.
Be it enacted by the Senate and House of Representatives of the United States of America in Congress assembled. That this Act may J^ot""" vehicle be cited as the "Motor Velhicle Information and Cost Savings Act". e"ost'savhl^gs'Act. DEFINITIONS
SEC. 2. For the purpose of this Act: (1) The term "passenger motor vehicle'* means a motor vehicle with motive power, designed for carrying twelve persons or less, except (A) a motorcycle or (B) a truck not designed primarily to carry its operator or passengers. (2) The term "multipurpose passenger vehicle" means a passenger motor vehicle which is constructed either on a truck chassis or with special features for occasional off-road operation. (3) The term "passenger motor vehicle equipment" means (A) any system, part or component of a passenger motor vehicle as originally manufactured or any similar part or component manufactured or sold for replacement or improvement of such system, part, or component or as an accessory, or addition to a passenger motor vehicle, or (B) a towing device. (4) The term "towing device" means any device manufactured or sold for use in towing a passenger motor vehicle. (5) The term "property loss reduction standard" means a minimum performance standard established for the purpose of increasing the resistance of passenger motor vehicles or passenger motor vehicle equipment to damage resulting from motor vehicle accidents or for the purpose of reducing the cost of repairing such vehicles or such equipment damaged as a result of such accidents. (6) The term "bumper standard" means any property loss reduction standard the purpose of which is (A) to eliminate or reduce substantially physical damage to the front or rear ends (or both) of a passenger motor vehicle resulting from (i) a lowspeed collision (including but not limited to a low-speed collision
�
