Page:EB1911 - Volume 22.djvu/220

From Wikisource
Jump to navigation Jump to search
This page needs to be proofread.
206
POTENTIOMETER


into its modern direct reading form by '[. A. Fleming in 1885 (see I industries, 1886, i. 152). In principle the modern potentiometer consists of an arrangement by means of which any potential difference not exceeding a certain assigned value can be compared with that of a standard cell having a. known electromotive force. In simplest form it consists of a long, straight, fine, uniform wire stretched over a divided scale. The ends of this wire are connected to one or more secondary cells of constant electromotive force, a variable resistance- being interposed so as to regulate the current flowing through the fine wire. To one end of this fine wire is attached one terminal of a sensitive galvanometer. Sliding contacts can be moved along the fine wire into any position. Supposing that the scale under this wire is divided into 2000 parts and that we are in possession of a standard Clark cell, the electromotive force being known at various temperatures, and equal, say, to I'434 volts at 15° C. The first process is to set the potentiometer. The slider is placed so as to touch the fine wire at division No. 14 34 on the fine wire, and the Clark cell is connected in between the sliding contact and one terminal of the galvanometer, so that its negative pole is connected through the galvanometer with that end of the fine wire to which the negative pole of the working battery is attached. The resistance in circuit with the fine wire is then altered until the galvanometer shows no reflexion. We then know that the fall of potential down the 2000 divisions of the line wire must be exactly 2 volts. If then we substitute for the standard cell any other source of electromotive force, we can move the slider into another position in which the galvanometer will show no deflection. The scale reading then indicates directly the electromotive force of this second source of potential. Thus, for instance, if an experiment were made with a Leclanché cell, and if the balancing-point were found to be at r 500 divisions on the scale, the electromotive force would be determined as 1- 500 volts. Instead of adjusting in this manner the electromotive force of any form of cell, if we pass any constant current through a known resistance and bring wires from the extremities of that resistance into connexion with the slider and the galvanometer terminal, we can in the same way determine the fall of potential down the above resistance in terms of the electromotive force of the standard cell and thus measure the current flowing through the standard resistance.

In the practical form the potentiometer wire is partly replaced by a number of coils of wire, say 14 (see fig. 1), and the potentiometer wire itself has a resistance equal to one of these coils. One terminal of the galvanometer can then be shifted to the junction S

|C

0:2 0$67B.9lDllIl/314

- rm a: b

>

é ||l

B

FIG. 1.

between any pair of consecutive coils and the slider shifted to any point on the potentiometer wire. By such an arrangement the potential difference can be measured of any amount from 0 to I-5 volts. In some cases the potentiometer wire is wholly replaced by a series of coils divided into small subdivisions. We may employ such a potentiometer to measure large potential difference greater than the electromotive force of the working battery, as follows: The two points between which the potential difference is required are connected by high resistance, say of 100,000 ohms or more, and from the extremities of a known fraction of this resistance, say, I/IO0 or 1/1000 or 1/10,000 wires are brought to the potentiometer and connected in between the slider and the corresponding galvanometer terminal. We can thus measure as described the drop in volts down a known fraction of the whole high resistance and therefore calculate the fall in potential down the whole of the high resistance, which is the otential difference required. The potentiometer and the divided) resistance constitute a sort of electrical scale yard by means of which any electromotive force or difference of potential can be compared with the electromotive force of a standard cell. Very convenient and practical forms of potentiometer have been devised by Crompton (fig. 2), Nalder, Elliot Bros., Fleming OAO OBO OCO QDQ 0:0 OFQ

%""»

g of i I

{:f'l¢" C " xéuggi

I b

FIG. 2.-Diagram of the Internal Connexions of a Crompton Potentiometer.

a b, The scale wire.

c, The set of equal potentiometer coils in series with it. d, The double pole switch connecting the 6 pairs of terminals Tix B C D E F in s tic cession to the slide contacts. e, e resistance cox s.

f, The rheostat.

g, The galvanometer key.

A, B, C, 13, E, F, Tegntifnals to which standard cell or voltages to be teste are attac e .

and others. An essential accompaniment therefore of the potentiometer is a series of standard low resistances, say of 0-1, o-01, o-oo1 ohm, and also a series of higher resistances divided into known fractions. In practical work, the low resistances take the form of certain strips of metal which have on them two pairs of terminals, one termed “ current terminals, " and the other “ potential terminals.” These resistance strips, as they are called, are carefully adjusted so that the resistance between the potential terminals has a known low value. In order to measure the value of a continuous electric current, and therefore to calibrate any ampere meter we proceed as follows: The ampere meter is placed in series with a suitable low resistance strip, say of O'OI ohm. From the potential terminals of the strip, wires are brought to the potentiometer so as to determine their potential difference in terms of the electromotive force of the standard Clark cell. An observation is then taken of the reading of the ampere meter and of the fall of resistance down the low resistance when a certain steady current is passing through the strip and ampere meter. Supposing that the potential fall down the strip is found to be -981 volt, the strip difference having a resistance of 0-1 ohm, it would be seen that the current passing through the strip was 98-1 amperes. If then the ampere meter Scale reading was 100 it would show an error of that scale reading of minus I-9 amperes or nearly 2 %. In the same manner the potentiometer may pei used to calibrate a voltmeter by the aid of a divided resistance o nown va ue.,

In electrical measurements connected with incandescent electric lamps the potentiometer is of great use, as it enables us to make accurately and nearly simultaneously two measurements, one of the current through the lamp and the other of the potential difference of the terminals. For this purpose a resistance, sa, of one ohm is placed in series with the lamp and a resistance of 100,000 ohms placed across the terminals of the lamp; the latter resistance is divided into two parts, one consisting of 1000 ohms and the other of 99,009 ohms. The potentiometer enables us to measure therefore the current through the lamp by measuring the drop in volts down a resistance in series with it and the potential difference of the terminals of the lamp by measuring the drop in volts down the 100th part of lthef hggla resistance of 100,000 ohms connected across the terminaso the amp.

Standard Cells.-A necessary adjunct to the potentiometer is some form of standard cell to be used as a standard of electromotive force. In the case of the Clark standard cell above mentioned the elements are mercury and zinc separated by a paste of mercurous sulphate mixed with a saturated solution of zinc sulphate. Other voltaic standards of electromotive force are in use, such as the Weston cadmium cell, the Helmholtz calomel cell, and the standard Daniell cell. The Clark cell is made in two forms, the board of trade or tubular form, and the H form of cell devised by Lord Rayleigh. The German experts seem to favour the latter form; the specification issued by the Physikalisch-Technische Reichsanstalt of Berlin may be found in the Electrician, xxxi. 265-266. The electromotive force of the cell diminishes with rise of temperature, the board of trade value being 1-434 volts at 15° C.1 and 1-434 (1 -0-000:77 (t- 15)) volts at t° C. A more exact expression is obtained if instead of o-ooo77 the quantity 0-000784-0'O00OI7 (t-15) is used. In the Weston standard cell cadmium and cadmium sulphate are substituted for zinc and zinc sulphate; it has the advantage of a much smaller coefficient of temperature variation than the Clark cell. It is most conveniently made up in a glass vessel of H form, pure mercury and cadmium amalgam being the two elements (fig. 5), 1 According to K. Kahle and W. Wien, the electromotive force of the H form of Clark cell is 1-4322 volts at 15° C.