- The quality assurance coordinator should not be under the direct supervision of management responsible for day-to-day laboratory operation. In this way, conflicts between the laboratory’s dual responsibilities of providing analytical results in a rapid fashion while maintaining quality can be avoided. The quality assurance coordinator should also serve as a resource person for chemists or managers on questions or problems related to quality assurance and should have a working knowledge of statistics, including quality control charting, and experimental design.
- Sample Clerk
The sample clerk's functions will also vary, depending on the size and function of the laboratory. As a minimum, the sample clerk is responsible for the receipt and log-in of samples. Field samples should be stored in a secure location under proper conditions (temperature, etc.) until analysis. Logging and tracking of samples in the laboratory is important so that the history of these samples can be documented and processed in a timely manner. The sample clerk may also be given the responsibility of maintaining chain of custody documentation.
3. QUALITY ASSURANCE IN SAMPLING
Quality assurance procedures should not be overlooked by personnel performing field sampling. The field sampling parameters often have more effect on precision and accuracy of the final result than parameters of the measurement.[1][2][3][4] Field personnel should become familiar with sampling and measurement methods which they will use. The methods usually specify the proper sampling media to be used, the correct flow rate and sample volume, as well as special precautions on sample handling, shipping and possible interferences.
Sampling equipment must be maintained in reliable working order. It is desirable to have one person or group given responsibility for the care, maintenance and stocking of field sampling equipment. This person or group should periodically inspect and repair all equipment and keep track of the use and location of sampling equipment when it is signed out. Sampling pumps should be calibrated with each use. This calibration should be performed with the sampler in line. Since differences in pressure drop across the sampler will affect flow rate, it may be necessary to perform the calibration with the actual sampler to be used.
The exact sampling time must be known in order to accurately estimate the sampled volume. Recording only the start and stop time assumes that the pump functions properly over the entire sampling period. Occasional spot checks for proper operation should be made throughout the sampling period.
Since many modern analytical techniques are extremely sensitive, special care must be taken to avoid contamination of field samples.[5] Samples must not be stored or shipped with bulk materials which
- ↑ Garfield, F. M. Quality Assurance Principles for Analytical Laboratories, Association of Official Analytical Chemists, AOAC International, Arlington, VA (1991).
- ↑ Keith, L. H. Environmental Sampling and Analysis: A Practical Guide, Lewis Publishers, Chelsea, MI (1991).
- ↑ Kratochvil, B. and J. K. Taylor. "Sampling for Chemical Analysis," Anal. Chem., 53, 924A–938A (1981).
- ↑ Cali, J. P. and W. P. Reed. Accuracy in Trace Analysis: Sampling, Sample Handling, Analysis, NBS Spec. Publication 422, Vol 1, 41 (1976).
- ↑ Kosta L. Talanta, 29, 985–992 (1982).
