PROCLAMATION 5911—NOV. 19, 1988 103 STAT. 2651 104. Heading 9011 is modified by striking out "microphotography, microcinematography" and inserting "photomicrography, cinemicrography" in lieu thereof. 105. Subheading 9011.20 is modified by striking out "microphotography, microcinemato- graphy" and inserting "photomicrography, cinemicrography" in lieu thereof. 106. Subheading 9018.90.60 is modified by deleting "and parts and accessories thereof and inserting ",other than extracorporeal shock wave lithotripters; all the foregoing and parts and accessories thereof in lieu thereof. 107. Additional U.S. note 4 of chapter 91 is modified to read as follows: "4. Special Marking Requirements: With the following exceptions, any movement or case provided for in this chapter, whether imported separately or attached to any article provid- ed for in this chapter, shall not be permitted to be entered unless conspicuously and indeli- bly marked by cutting, die-sinking, engraving, stamping, or mold-marking (either indented or raised), as specified below. Movements with opto-electronic display only and cases de- signed for use therewith, whether entered as separate articles or as components of assem- bled watches or clocks, are excepted from the marking requirements set forth in this note. The special marking requirements are as follows: (a) Watch movements shall be marked on one or more of the bridges or top plates to show— (i) the name of the country of manufacture; (ii) the name of the manufacttirer or purchaser; and (iii) in words, the niunber of jewels, if any, serving a mechanical purpose as fiictional bear- ings. (b) Clock movements shall be marked on the most visible part of the front or back plate to show— (i) the name of the country of manufacture; (ii) the name of the manufacturer or purchaser; and (iii) the number of jewels, if any. (c) Watch cases shall be marked on the inside or outside of the back to show— (i) the name of the country of manufacture; and (ii] the name of the manufacturer or purchaser. (d) Clock cases provided for in this chapter shall be marked on the most visible part of the outside of the back to show the name of the country of manufacture.". 108. Subheadings 9209.92.80, 9209.94.80, 9209.99.40, and 9209.99.80 are modified by deleting the asterisk following the "E" designation in the "Special" subcolunm of rate of duty coliunn 1 for each of these items. 109. Subheading 9301.00 is modified by striking out the article description and inserting "Military weapons, other than revolvers, pistols and the arms of heading 9307:" in lieu thereof. 110. Note 1(e) of chapter 94 is modified by striking out "Fiuniture specially designed as parts of refiigerators of heading 8418;" and inserting "Furniture speciaUy designed as parts of refrigerating or freezing equipment of heading 8418;" in lieu thereof. 111. Subheadings 9603.30.20 through 9603.30.60, 9606.10.40 and 9606.10.80 are each modified by striking out "cents" each place it occurs in the respective article descriptions and insert- ing "i" in lieu thereof. 112. Heading 9608 is modified by striking out "stylos" in the article description and inserting "styU" in lieu thereof. 113. Subheading 9616.20.00 is modified by striking the asterisk following the "E" designation in the "Special" subcolunm of rate of duty column 1. 114. Subheading 9705.00.00 is modified by striking out "archaeological, palaeontological," in the article description and inserting "archeological, paleontological," in lieu thereof. 115. U.S. note 2(ij) to subchapter XVII of chapter 98 is modified by striking out "7308.50" and inserting "7308.90" in lieu thereof. 116. U.S. note 2 to subchapter II of chapter 99 is modified by striking out "9903.84.30 or 9903.84.40" and inserting "9903.41.20 or 9903.41.25" in lieu thereof. 117. Subchapter II of chapter 99 is modified by adding after U.S. note 2 the following notes: "3.(a) For so long as subheading 9902.51.01 is in effect, additional U.S. notes 2(d)(ii), 2(d)(iii), and 2(d)(iv) of chapter 51 shall be suspended.
�
