104 STAT. 4516 PUBLIC LAW 101-629—NOV. 28, 1990 Regulations. Federal Register, publication. Regulations. Regulations. Federal Register, publication. Regulations. tribution before May 28, 1976, and which are subject to revision of classification under paragraph (2), to submit to the Secretary a summary of and citation to any information known or otherwise available to the manufacturer respecting such devices, including adverse safety or effectiveness information which has not been submitted under section 519. The Secretary may require the manufacturer to submit the adverse safety or effectiveness data for which a summary and citation were submitted, if such data are available to the manufacturer. "(2) After the issuance of an order under paragraph (1) but before December 1, 1995, the Secretary shall publish a regulation in the Federal Register for each device— "(A) which the Secretary has classified as a class III device, and "(B) for which no final regulation has been promulgated under section 515(b), revising the classification of the device so that the device is classified into class I or class II, unless the regulation requires the device to remain in class III. In determining whether to revise the classification of a device or to require a device to remain in class III, the Secretary shall apply the criteria set forth in section 513(a). Before the publication of a regulation requiring a device to remain in class III or revising its classification, the Secretary shall publish a proposed regulation respecting the classification of a device under this paragraph and provide reasonable opportunity for the submission of comments on any such regulation. No regulation requiring a device to remain in class III or revising its classification may take effect before the expiration of 90 days from the date of its publication in the Federal Register as a proposed regulation. "(3) The Secretary shall, as promptly as is reasonably achievable, but not later than 12 months after the effective date of the regulation requiring a device to remain in class III, establish a schedule for the promulgation of a section 515(b) regulation for each device which is subject to the regulation requiring the device to remain in class III.". (2) Section 520(1) (21 U.S.C. 360j(l)) is amended by adding at the end the following: "(5)(A) Before December 1, 1991, the Secretary shall by order require manufacturers of devices described in paragraph (1), which are subject to revision of classification under subparagraph (B), to submit to the Secretary a summary of and citation to any information known or otherwise available to the manufacturers respecting the devices, including adverse safety or effectiveness information which has not been submitted under section 519. The Secretary may require a manufacturer to submit the adverse safety or effectiveness data for which a summary and citation were submitted, if such data are available to the manufacturer. "(B) Except as provided in subparagraph (C), after the issuance of an order under subparagraph (A) but before December 1, 1992, the Secretary shall publish a regulation in the Federal Register for each device which is classified in class III under paragraph (1) revising the classification of the device so that the device is classified into class I or class II, unless the regulation requires the device to remain in class III. In determining whether to revise the classification of a device or to require a device to remain in class III, the Secretary shall apply the criteria set forth in section 513(a). Before the publication of a regulation requiring a device to remain in class III or
�
