PROCLAMATION 6641—DEC. 15, 1993 108 STAT. 5319 Annex II (con.) - 20- Section (A). (con.) 37. Additional U.S. note 1 to chapter 84 Is modified by deleting "8479.89.60" and inserting "8479.89.65" in lieu thereof and by deleting "8479.90.80" and inserting "8479.90.95" in lieu thereof. 38. The additional U.S. notes to chapter 84 are modified by inserting an additional U.S. note as follows: "2. subheadings 8473.30.30 and 8473.30.60 cover the foUouing parts of printers of subheading 8471.92: (a) Control or comaand assesblies, incorporating more than one of the following: printed circuit assenbly, hard or flexible (floppy) disk drive, keyboard, user interface; (b) Light source assoifelies, inconxrating more than one of the following: light emitting diode assenbly, gas laser, mirror polygon asseifcly, base casting; (c) Laser imaging assenblies, incorporating more than one of the following: photoreceptor belt or cylinder, toner receptacle unit, toner developing init, charge/discharge uiits, cleaning rnit; (d) Image fixing assenfalies, inconwrating more than one of the following: fuser, pressure roller, heating element, release oil dispenser, cleaning unit, electrical control; (e) Ink jet marking asscablies, incorporating more than one of the following: thermal print head, ink dispensing mit, nozzle and reservoir uiit, ink heater; (f) Maintenance/sealing assenblies, incorporating more than one of the following: vacuun unit, ink jet covering mit, sealing unit, pjrging init; (g) Paper handling assenfclies, incorporating more than one of the following: paper transport belt, roller, print bar, carriage, gripper roller, paper storage unit, exit tray; (h) Thenrnl transfer imaging assenblies, incorporating more than one of the following: thermal print head, cleaning unit, sifiply or take-up roller; (ij) lonographic imaging assenblies, incorporating more than one of the following: ion generation and emitting unit, air assist unit, printed circuit assenfaly, charge receptor belt or cylinder, toner receptacle unit, toner distribution mit, developer receptacle and distribution uiit, developing init, charge/discharge wit, cleaning unit; or (k) Ccnbinations of the above specified assorijlies," 39. Subheadings 8406.90.10 and 8406.90.90 are superseded by: [Steam turbines and other...:] CParts:] "Of steam turbines: 8406.90.20 Rotors, finished for final assenbly.... 7.5X Free (A,CA,E,IL,J, 20X HX) 8406.90.30 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or Kit location in finishing binery 7.5X Free (A,CA,E,IL,J, 20X •MX) 8406.90.40 Blades, rotating or stationary 7.5% Free (A, CA, E,I L,J, 20X MX) 8406.90.45 Other 7.5X Free (A,CA,E,1L,J, 20X MX) Other: 8406.90.50 Rotors, finished for final assenbly.... 4.5% Free (A,CA,E,IL,J, 27.5X MX) 8406.90.60 Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or ait location in finishing ine ry 4.5X Free (A,CA.E,IL,J, 27.5X MX) 8406.90.70 Blades, rotating or stationary 4.5X Free (A,CA,E,IL,J, 27.5X MX). 8406.90.75 Othw 4.5% Free (A,CA,E,IL,J, 27.5X" MX) to perm i macniner to permi' macniner
�
