113 STAT. 2122 PROCLAMATION 7210-JULY 22, 1999 7219.32.0020, 7219.32.0038, 7219.32.0060, 7219.33.0035, 7219.33.0044, 7219.34.0005, II. Ball bearing steels, as defined in the HTSUS; III. Tool steels, as defined in the HTSUS; IV. Silico-manganese steel, as defined in the HTSUS; V. Silicon-electrical steels, as defined in the HTSUS, that are grain-oriented; VI. Silicon-electrical steels, as defined in the HTSUS, that are not grain-oriented and that have a silicon level exceeding 2.25 percent; VII. All products (proprietary or otherwise) based on an alloy ASTM specification (sample specifications: ASTH A506, A507). The covered merchandise may be reported under the following HTSUS categories: 7217.10.1000, 7217.10.2000, 7217.10.3000, 7217.10.7000, 7217.90.1000, 7217.90.5030, 7217.90.5060, 7217.90.5090, 7219.31.0010, 7219.31.0050, 7219.32.0005, 7219.32.0025, 7219.32.0035, 7219.32.0036, 7219.32.0042, 7219.32.0044, 7219.32.0045, 7219.33.0005, 7219.33.0020, 7219.33.0025, 7219.33.0036, 7219.33.0038, 7219.33.0042, 7219.33.0045, 7219.33.0070, 7219.33.0080, 7219.34.0020, 7219.34.0025, 7219.34.0030, 7219.34.0035, 7219.34.0050, 7219.35.0005, 7219.35.0015, 7219.35.0030, 7219.35.0035, 7219.35.0050, 7219.90.0010, 7219.90.0020, 7219.90.0025, 7219.90.0060, 7219.90.0080, 7220.20.1010, 7220.20.1015, 7220.20.1060, 7220.20.1080, 7220.20.6005, 7220,20.6010, 7220.20.6015, 7220.20.6060, 7220.20.6080, 7220.20.7005, 7220.20.7010, 7220.20.7015, 7220.20.7060, 7220.20.7080, 7220.20.8000, 7220.20.9030, 7220.20.9060, 7220.90.0010, 7220.90.0015, 7220.90.0060, 7220.90.0080, 7223.00.5000, 7225.11.0000, 7225.19.0000, 7225.99.0010, 7225.50.6000, 7225.50.7000, 7225.50.8010, 7225.50.8015, 7225.50.8085, 7225.90.0090, 7226.11.1000, 7226.11.9030, 7226.11.9060, 7226.19.1000, 7226.19.9000, 7226.92.5000, 7226.92.7005, 7226.92.7050, 7226.92.8005, 7226.92.8050, 7226.99.0000, 7229.90.1000. Cold-rolled steel is equivalent to AISI categories 32 (coldrolled sheet), 37 (cold-rolled strip), and 28 (black plate). (2) Semifinished Steel Products are defined as the following: Certain iron and steel products (whether or not stainless, other alloy, or non-alloy) in the following forms:.^ngots and other primary forma; semifinished products (whether {or not of rectangular cross-section, and whether or not with a width measuring at least twice the thiclcness). The merchandise is classified in the HTSUS at subheadings: 7206.10.0000, 7206.90.0000, 7207.11.0000, 7207.12.0010, 7207.12.0050, 7207.19.0030, 7207.19.0090, 7207.20.0025, 7207.20.0045, 7207.20.0075, 7207.20.0090, 7218.10.0000,
�
