Page:United States Statutes at Large Volume 116 Part 4.djvu/772

From Wikisource
Jump to navigation Jump to search
This page needs to be proofread.

116 STAT. 3200 PROCLAMATION 7529-MAR. 5, 2002 ANNEX (continued) 11 (D) hot-rolled, flat-rolled, dual-phase steel product, phase-hardened, primarily with a ferritic-martensitic microstructure, containing, by weight, from 0.9 percent to 1.5 percent silicon; further characterized, for thicknesses greater than or equal to 2 mm, either by a tensile strength of from 540 N/mm' to 640 N/mm' with an elongation percentage of greater than or equal to 26 percent, or by a tensile strength of from 590 N/mm' to 690 N/mm- with an elongation percentage of greater than or equal to 23 percent, the foregoing also designated as X-OII; (xviii) hot-rolled dual phase low silicon steel, the foregoing which is a phase-hardened fcrritic-manensitic steel containing, by weight, silicon of up to 0.25 percent, phosphorus of up to 0.05 percent and sulfur of 0.03 percent, and has a tensile strength of between 580 and 670 MPa, yield strength of between 300 and 470 MPa, and elongation of greater than, or equal to, 24 percent, the foregoing designated as X-075; (xix) hot-rolled products designated as X-108, as described below; (A) products known as "Domex Defend 250," not further processed than hot rolled, in thicknesses of between 3.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive, containing, by weight, carbon of 0.12 percent typical value (TV), silicon of 0.40 percent TV, manganese of 2.0 percent TV, phosphorus of 0.025 percent TV, sulphur of 0.010 percent TV, alummum of 0.015 percent TV, with micro-alloying elements of niobium, vanadium, titanium and molybdenum; exhibiting a hardness rating of 250 Hv (provided for in subheading 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70); (B) products known as "Domex Defend 300," not further processed than hot rolled, in thicknesses of between 3.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive; containing, by weight, carbon of 0.17 percent TV, silicon of 0.30 percent TV, manganese of 1.8 percent TV, phosphorus of 0.025 percent TV, sulphur of 0.010 percent TV, aluminum of 0.015 percent TV, with micro-alloying elements of chromium, molybdenum, and titanium; exhibiting a hardness rating of 300 Hv (provided for in subheadings 7208.36.00, 7208.37.00, 7208.38.00, 7208.39.00, 7225.30.30 or 7225.30.70); o r (C) products known as "Domex Defend 500," not further processed than hot-rolled, in thicknesses of between 2.00 and 6.00 mm, inclusive, and widths of between 889 mm and 1245 mm, inclusive; containing, by weight, carbon of 0.29 percent TV, silicon of 0.30 percent TV, manganese of 1.3 percent TV, phosphorus of 0.035 percent TV, sulphur of 0.025 percent TV, with micro-alloying elements of chromium, niobium, molybdenum, and boron; exhibiting a hardness rating of 500 Hv (provided for in subheading 7208.36.00, 7208.37.00, 7208.38.00. 7208.39.00, 7225.30.30 o r 7225.30.70); (x.x) flat-rolled products of other alloy steel, not further processed than hot rolled, of the grade known as ALFORM" or "ALFORM 890/900," of a thickness of less than 4.75 mm, whether in coils or in cut-to-length form (provided for in subheading 7225.30.70 or 7225.40.70), the foregoing designated asX-116; (xxi) hot-rolled products designated as X-122, as described below: (A) hot-rolled complex phase steel with mainly fine grained ferritic-bainitic-martensitic microstructure characterized by either a tensile strength over 800 MPa and elongation percentage over 10% for thicknesses up to 5.0 mm; a tensile strength over 880 MPa and an elongation percentage over 10% for thicknesses up to 4.0 mm; or a tensile strength over 950 MPa and an elongation percentage over 10% for thicknesses up to 4.0 mm; (B) hot-rolled martensitic phase steel with mainly martensitic microstructure characterized by either (1) a tensile strength over 1000 MPa and elongation percentage over 5 percent for thicknesses up to 3.5 mm, or (II) a tensile strength over 1200 MPa and an elongation percentage over 5 percent for thicknesses up to 4.0 mm; or