121 STAT. 856
Deadline.
Deadline.
dkrause on GSDDPC44 with PUBLAW
Deadline.
VerDate Aug 31 2005
13:52 Jan 23, 2009
PUBLIC LAW 110–85—SEPT. 27, 2007
‘‘(IV) includes a certification that, with respect to the devices that are manufactured, prepared, propagated, compounded, or processed in the establishment— ‘‘(aa) at least 1 of such devices is marketed in the United States; and ‘‘(bb) at least 1 of such devices is marketed, or is intended to be marketed, in 1 or more foreign countries, 1 of which countries certifies, accredits, or otherwise recognizes the person accredited under paragraph (2) and identified under subclause (III) as a person authorized to conduct inspections of device establishments. ‘‘(B)(i) Except with respect to the requirement of subparagraph (A)(i), a device establishment is deemed to have clearance to participate in the program and to use the accredited person identified in the notice under subparagraph (A)(ii) for inspections of the establishment unless the Secretary, not later than 30 days after receiving such notice, issues a response that— ‘‘(I) denies clearance to participate as provided under subparagraph (C); or ‘‘(II) makes a request under clause (ii). ‘‘(ii) The Secretary may request from the owner or operator of a device establishment in response to the notice under subparagraph (A)(ii) with respect to the establishment, or from the particular accredited person identified in such notice— ‘‘(I) compliance data for the establishment in accordance with clause (iii)(I); or ‘‘(II) information concerning the relationship between the owner or operator of the establishment and the accredited person identified in such notice in accordance with clause (iii)(II). The owner or operator of the establishment, or such accredited person, as the case may be, shall respond to such a request not later than 60 days after receiving such request. ‘‘(iii)(I) The compliance data to be submitted by the owner or operator of a device establishment in response to a request under clause (ii)(I) are data describing whether the quality controls of the establishment have been sufficient for ensuring consistent compliance with current good manufacturing practice within the meaning of section 501(h) and with other applicable provisions of this Act. Such data shall include complete reports of inspectional findings regarding good manufacturing practice or other quality control audits that, during the preceding 2-year period, were conducted at the establishment by persons other than the owner or operator of the establishment, together with all other compliance data the Secretary deems necessary. Data under the preceding sentence shall demonstrate to the Secretary whether the establishment has facilitated consistent compliance by promptly correcting any compliance problems identified in such inspections. ‘‘(II) A request to an accredited person under clause (ii)(II) may not seek any information that is not required to be maintained by such person in records under subsection (f)(1). ‘‘(iv) A device establishment is deemed to have clearance to participate in the program and to use the accredited person identified in the notice under subparagraph (A)(ii) for inspections of the establishment unless the Secretary, not later than 60 days after receiving the information requested under clause (ii), issues
Jkt 059194
PO 00001
Frm 00854
Fmt 6580
Sfmt 6581
M:\STATUTES\2007\59194PT1.001
APPS10
PsN: 59194PT1
�
