Search results

Jump to: navigation, search
Did you mean: slave roamer
  • dollar, at seventy pounds when cheap. It is usually levigated with slab and roller, and made into sour cakes. Some, however, prefer the Arab form "balilah
    34 KB (6,083 words) - 01:14, 18 April 2012
  • quern is here unknown [20]. A flat, smooth, oval slab, weighing about fifteen pounds, and a stone roller six inches in diameter, worked with both hands
    54 KB (9,779 words) - 01:13, 18 April 2012
  • rolling is to make the book as solid as possible. For beating, a stone or iron slab, used as a bed, and a heavy hammer, are necessary. The stone or iron must
    355 bytes (981 words) - 14:47, 3 March 2011
  • powdery icing-sugar, the mass then flavored, rolled flat with a wooden roller, and cut into shape with a tin cutter. In this case the sugar is not even
    732 bytes (2,893 words) - 15:34, 23 August 2015
  • of uniform thickness. The next stage is the feeding of portions of this slab of dough to a cutting and panning machine. In details this apparatus differs
    268 bytes (1,106 words) - 22:12, 27 January 2015
  • revolving carborundum wheels, and are afterwards polished by hand. Marble wall-slabbing needs very careful fixing, and should be well supported by a sufficient
    12 KB (2,007 words) - 23:16, 24 December 2012
  • that,    'Tis one thing or the other." Now all is changed. A steam-roller goes up and down Tincombe Lane, the angles have been rounded, the precipitous
    289 bytes (2,879 words) - 20:16, 28 January 2011
  • stirring. A mass of glass in a viscous state can be rolled with an iron roller like dough; can be rendered hollow by the pressure of the human breath or
    169 KB (26,978 words) - 16:46, 25 December 2012
  • prostrating some trees as it entered a field, where it leveled the grass as if a roller had passed along, and made three distinct shallow holes in the ground, at
    643 bytes (3,273 words) - 20:54, 11 October 2013
  • second vibrating composition roller conveys the ink from this drum to the distributing table or ink slab, on which other rollers, called distributors, still
    232 bytes (10,853 words) - 17:36, 6 November 2015
  • edges by means of one or more rollers. The top roller or rollers holds the colour, which is distributed on the under rollers; these, in turn, ink the edge
    361 bytes (3,287 words) - 15:35, 3 March 2011
  • finishing rollers at the end. Input slabs travel through one stand after another and are reduced in thickness at each stand. Each stand rolls the slab once
    26 KB (2,786 words) - 16:13, 13 April 2012
  • sliding of the wire inside the cable. Another popular type of brake is the roller lever brake. This is usually made up by the cycle maker to suit his own
    71 bytes (3,458 words) - 21:55, 27 January 2013
  • moss. The long stem, feathered with great blossoms, springs from a bare slab of wood. No mold nor peat surrounds it; there is absolutely nothing save
    542 bytes (6,946 words) - 20:31, 8 March 2012
  • wooden roller, but more often a simple roll, whence our word volume, the rolled or revolved thing. The title was a small tag attached to the roller or to
    783 bytes (6,166 words) - 12:07, 24 August 2015
  • with an iron roller, thirty inches in diameter and fifteen feet long. Strips of iron on each side of the table afford a bearing for the rollers and determine
    844 bytes (6,919 words) - 17:47, 23 August 2015
  • saw, roller supports on rails taking the weight at each end of the bench. Roller-feed saws propel the stuff by the contact of vertical fluted rollers placed
    217 KB (37,675 words) - 02:33, 30 October 2015
  • in slabs of close texture, not unlike slate in appearance. These slabs go next to the granulator, in which they pass through a series of rollers, separated
    659 bytes (6,145 words) - 14:38, 7 January 2012
  • minutes and then there was a rather sudden decrease in the size of the rollers, the rising water now being increased by more gentle but still very rapidly
    1 KB (5,578 words) - 22:24, 29 September 2015
  • By Messrs. Hulse & Co., Ltd. (Manchester). burnishing rollers. These are revolving steel rollers secured in the tool posts, or carried by attachments at
    328 bytes (2,041 words) - 03:22, 7 November 2015

View (previous 20 | next 20) (20 | 50 | 100 | 250 | 500)