Page:A Book of Dartmoor.djvu/154

From Wikisource
Jump to navigation Jump to search
This page has been validated.
112
TIN-STREAMING

In Staffordshire, at Kinver, and in the neighbourhood of Stourbridge, in Worcestershire, I have seen banks and hedges made up of what are locally called burrs. These consist of masses of sand and iron slag, two feet in diameter, round, and concave on one side, convex on the other. These burrs were formed in the primitive manufacture of iron, which much resembled that of tin. Andrew Yarranton, in England's Improvement by Sea and Land, 1698, says that he saw dug up near the walls of Worcester the hearth of an old Roman iron-furnace.


"It was an open hearth upon which was placed alternately charcoal and ironstone, to which fire being applied; it was urged by men treading upon bellows. The operation was very slow and imperfect. Unless the ore was very rich, not more than one hundredweight of iron could be extracted in a day. The ironstone did not melt, but was found at the bottom of the hearth in a large lump or bloom, which was afterwards taken out and beaten under massive hammers previous to its being worked into the required shape or form."


The burrs found are the sand and iron mixed that encased the bloom, which was taken out by pincers and worked on the anvil. The scoria that encased the bloom was thrown aside, and yet contains more than one-half of iron. The iron reduced in this simple manner never ran, but it became soft like dough, and could be removed and beaten into shape.

The method of dealing with the tin was similar, only that in this latter case the metal flowed. That