Page:Advanced Automation for Space Missions.djvu/116

1. 1. Chemical
   2. Photochemical
   3. Laserbeam
2. Joining
   1. Welding
      1. Arc
         1. Shielded metal
         2. Gas metal
            1. Pulsed
            2. Short circuit
            3. Electrogas
            4. Spray transfer
         3. Gas tungsten
         4. Flux-cored
         5. Submerged
         6. Plasma arc
         7. Carbon arc
         8. Stud
         9. Electroslag
         10. Atomic hydrogen
         11. Plasma-MIG (metal inert gas)
         12. Impregnated tape
      2. Oxyfuel gas
         1. Oxyacetylene gas
         2. Methylacetylene propadiene (MAPP)
         3. Air-acetylene
         4. Oxyhydrogen
         5. Pressure gas
            1. CO₂
      3. Resistance
         1. Spot
         2. Projection
         3. Seam
         4. Flash butt (flash)
         5. Upset(butt)
         6. Percussion
      4. Solid state
         1. Ultrasonic
         2. Explosive
         3. Diffusion
            1. Hot press
            2. Isostatic hot gas
            3. Vacuum furnace
         4. Friction
         5. Inertia
         6. Forge
         7. Cold
         8. Roll
      5. Electron beam
      6. Laser beam
         1. Solid-state
         2. Axial-flow gas
         3. Cross-flow gas
      7. Thermit
      8. Induction
         1. Low frequency (50-450 Hz)
         2. High frequency (induction resistance; 200-450 kHz)
      9. High frequency resistance
      10. Electromagnetic
      11. Flow
   2. Brazing
      1. Torch
      2. Induction
      3. Furnace
      4. Dip
      5. Resistance
      6. Infrared
      7. Vacuum
   3. Soldering
      1. Iron
      2. Resistance
      3. Hot plate
      4. Oven
      5. Induction
      6. Dip
      7. Wave
      8. Ultrasonic
   4. Sintering (of powdered metals)
   5. Adhesive bonding (incomplete)
      1. Thermo-setting and thermoplastic
         1. Epoxy
         2. Modified epoxy
         3. Phenolics
         4. Polyurethane
      2. Adhesive alloys
      3. Miscellaneous other powders, liquids, solids, and tapes
   6. Metal fasteners
      1. Screws
      2. Nuts and bolts
      3. Rivets
      4. Pins
         1. Cotter
         2. Groove
         3. Tapered
         4. Roll
      5. Retaining rings
      6. Quick-release
   7. Stitching
   8. Stapling
   9. Shrink fitting
   10. Press fitting
   11. Plastic
       1. Hot-air-welding
       2. Friction
       3. Heated metal plate
       4. Solvent
       5. Dielectric
       6. Magnetic
       7. Ultrasonic
       8. Radio frequency welding