There was a problem when proofreading this page.
STEP 4
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|DfT-circular-01-2016.pdf/31}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
- Go to Schedule 3, Part 3, paragraphs 8, 12, 13, 14 and 15.
- Select the legends 14 "No vehicles", 8 "A time period" and 15 "except for access".
- Permitted expressions of time periods are found in Schedule 18.
- Go to Schedule 3, Part 2 and choose the x-height for the plate legend appropriate for the size of roundel (for guidance see Traffic Signs Manual Chapter 3).
STEP 5
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|DfT-circular-01-2016.pdf/31}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
- The sign and associated plate is now complete.
- Go to Schedule 3, Part 2, Item 11 - Column 6. This column indicates the applicable provisions in Schedule 3, Part 4 that relate to this sign combination. As we have used legend 14, the provision in Schedule 3, Part 4 is paragraph 4.
- Go to Schedule 3, Part 4, paragraph 4 which lists the illumination requirements for the sign.
STEP 6
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|DfT-circular-01-2016.pdf/31}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
- Go to Schedule 3, Part 2, Item 11 - Column 7.
- This column indicates the Schedule 3 General Directions if any applicable to this sign.
- Go to Schedule 3 Part 5 for the General Directions.
- Paragraphs 1 and 3 state the following:
- 1.— (1) The sign must only be placed to indicate the effect of an Act, order, regulation, by-law, resolution or notice which prohibits or restricts the use of the road by traffic.
(2) When the sign is placed to indicate the point at which a restriction, requirement or prohibition begins or ends, it must be placed as near as practicable to that point.
(3) The sign must not be placed unless accompanied by its associated plate.
- 1.— (1) The sign must only be placed to indicate the effect of an Act, order, regulation, by-law, resolution or notice which prohibits or restricts the use of the road by traffic.
31