doubt if the one that I have just seen is of the best construction.
After the crop is cut, the swath is collected by the hand, and tied into sheaves; a small quantity of stalks still remain scattered over the surface, {17} these are commonly collected by the hand-rake. To facilitate the latter part of the process, a horse rake has been recently invented; of which the following figure is a representation.
An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Early western travels, 1748-1846 (1907 Volume 9).djvu/47}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |
AB is a beam about six inches square, and about twelve
feet long. CD is an upright rail that prevents the stalks
accumulated by the machine from falling over the beam
AB, and so left behind. EF, ef, are two supports to the
rail, which also serve as handles for steering, and occasionally
upsetting the machine. ABHG is a tire of wooden
teeth, one and a half inches diameter, and about six
inches distant from one another. These teeth are sharpened
at their extremities, and skim along the ground with
their points forward; raising up and collecting the stalks.