Page:Experimental researches in chemistry and.djvu/303

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
288
On the Manufacture of Optical Glass.
[1829.

first of these is 2 inches from the back edge of the fire, and in that direction extends 4 inches; the second is 4 inches from the first; and 6 inches beyond that one is the third.

During the action of the furnace, coke is supplied to this part, and arranged through two holes level with this space, and Wrought in the side of the furnace by leaving out a brick. They are made to occur nearly opposite the spaces between the supports seen when looking across the course of the flame, and are stopped by the insertion of loose bricks, and a piece of paper put before the place, which adheres from the pressure inwards of the atmosphere. These holes, being in the thickness of the walls of the furnace, are 17 inches long.

The tiles which form the bottom of the chamber and top of the flue, are of Cornish ware (52. 53), or at least the one which constitutes the half nearest the fire is of that material; but the other, which is not so highly heated, and never has to be removed, may be some other ware, and 2½ inches in thickness. The tile nearest the fire has to transmit heat to the glass, and if of Cornish ware, and being supported as described, is abundantly strong when ¾ths of an inch in thickness. It should be nicely adjusted by grinding (53), and when fitted in, the edges should be made close by a little fire-lute.

There is a part of the furnace not yet mentioned, which must be arranged as the structure is raised. This is the air-tube (55). It is of glazed porcelain, and passes horizontally through the side of the furnace, so that its inner aperture is 2 inches from the end of the glass chamber, and its lower edge level with the upper surface of the Cornish tile constituting the bottom, whilst the outer end is flush with the outside surface of the brickwork. Its length is 17 inches, its internal diameter ⅞ths of an inch. The short pieces of adjusting tube (55) are 6, 7, and 8 inches in length, and 7/10 ths of an inch internal diameter: their ends are usually finished obliquely.

All those parts of the furnace which are in contact with or near the fire, are of the best fire-bricks laid in loam; but the sides of that part of the cavity already described, which form the glass chamber, are fire-tiles, and they rise about an inch above the neighbouring brickwork, forming a raised edge all round, which, at the same time that it better excludes dirt than if level with the rest of the work, also allows the covers of the