them undisturbed, and with equal intensity for any length of time.
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Experimental researches in chemistry and.djvu/352}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
68. By making a broad mark, or raising a little ledge of bees' wax, or a mixture of bees' wax and turpentine, it was easy to confine the pool of water to the middle part of the plate, fig. 13, where, of course, the crispations were most powerfully produced. Such a barrier is often useful to separate the wet and dry parts of the glass,especially when a violin bow is used as the exciter.
69. In other experiments, deal laths, two, three, or four feet long, one inch and a half wide, and three-eighths or more of an inch in thickness, were used instead of the glass plates. These could be made to vibrate by the fingers and wet rod (67), and by either shifting the bridges or changing the lath, an almost unlimited change of isochronous vibrations, from that producing a high note to those in which not more than five or six occurred in a second, could be obtained. The crispations were formed upon a glass plate attached to the middle of the lath, by two or three little pellets of soft cement[1].
70. Obtained in this way the appearances were very beautiful, and the facilities very great. A glass plate, from four to eight inches square, could be covered uniformly with crispations of the utmost regularity; for, by attaching the plate with a little method, and at points equidistant from the centre of the bar, it was easy to make every part travel with the same velocity, and in that respect differ from and surpass the bar which sustained it. The conoidal heaps constituting the crispation could be so enlarged by slowness of vibration, that three or four occupied a linear inch. The glass plate could be removed, and another of different form or substance, and with other fluids, as mercury, &c., substituted in an instant.
71. In using laths, it is necessary to confine the parts bearing upon the bridges, either by slight pressure of the fingers, or by loops of string, or by weights. The exciting glass rod need not necessarily rest upon the middle of the bar or plate, but may be applied with equal effect at some distance from it. Long laths may be made to subdivide in their mode of vibration, according as the rod is applied to different places, and the
- ↑ Equal parts of yellow wax and turpentine.
