A wooden washer one inch thick is fixed to the axle on either side of the drum to avoid its contact with the uprights.
The handle is shaped out of a wooden piece of 2 inches x 2 inches x 1½ feet long.
The reel noticed in the diagram between the drum and the handle is composed of a wooden disc marked 9 made out of 1 inch thick and 6 inches square piece of wood. Six brackets made of galvanized wire of 10 gauge radiate from the centre of the disc so as to make a circumference of 4 feet. The brackets are fixed in the back of the disc with bent ends and are further secured with small nails near the circumference of the disc.
A wire noose is fixed on the back base just below the reel to regulate the yarn when wound up on the reel from a bobbin or directly from the spindle.
A 4 inches long bamboo pin is fixed in the inward side of the front base parallelly to the long plank marked 3. It is meant to hold the bobbin while opening out yarn from it. When the yarn is opened from
