164
Brown & Sharpe Mfg. Co.
Hobbing Teeth in Worm Wheel
The work is set up practically the same as in the operation of gashing the teeth, only the dog on the arbor is removed and the swivel table is set at zero. The worm wheel revolves freely on the centres, being rotated by the hob.
The wheel can be hobbed to the right depth by using a steel rule at the back of the knee to measure a distance equal to the centre distance of the worm and wheel from a line marked "Centre," on the vertical slide to the top of the knee. This line on the vertical slide indicates the position of the top of the knee when the index centres are at the same height as the centre of the machine spindle.
