This page needs to be proofread.
stern, at the end of which is a block or sheave-hole through which the mizzen-sheet is rove. If the mizzen is a good sized one, the bumpkin is provided with wire shrouds leading to either side of the stern, and with a wire bobstay. The mizzen-mast generally has one wire shroud on each side. Sometimes the mizzen-mast is further supported by stays leading from the masthead forward, which are set up by tackles. These stays are not used when the vessel is sailing free; the weather one is set up when the vessel is close-hauled. Care must be taken to ease off the tackle if the main boom is swinging over, else it may carry away the mizzen.
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Small-boat sailing; an explanation of the management of small yachts, half-decked and open sailing-boats of various rigs; sailing on sea and on river; cruising, etc (IA smallboatsailing01knig).pdf/132}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
Fig. 63.—Yawl.
A yawl is not so fast as a cutter of the same size,
