was only discovered after the church became a ruin, having previously been covered over. It has thus been well preserved, except that the projecting crockets along the top of the hood moulding, as well as most of the hood itself, have been chipped away, so as to make an even surface at the wall. It measures about 6 feet 6 inches long by 3 feet in depth, and about 4 feet high. It has well wrought mouldings, which die against
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|The ecclesiastical architecture of Scotland ( Volume 3).djvu/535}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
Fig. 1477.—Kinfauns Church. Recess in North Wall.
a rounded jamb, supported on a short shaft having a very simple cap and base. The floor of the recess was slightly raised above the floor of the church. The details of the mouldings show that this is a late design, probably sixteenth century.
The "Gray Aisle" on the south side of the church is roofed with a late example of groined vaulting (Fig. 1478), and it is curious to observe how
