in union with calomel.[1] Lassaigne says he has found it to be a compound of ten equivalents of albumen with one of mercury, or 93·33 per cent. of the former, and 6·67 of the latter.[2] The compound with fibrin he considers to be analogous in composition.
With regard to the changes induced by these effects of organized matter on the operation of the liquid tests for corrosive sublimate, it will in the first place be manifest that the poison may thus be wholly removed from their sphere of action: it may be thrown down as an insoluble substance, on which any process by liquid tests hitherto mentioned will of course fail to act. But secondly, even when a moderate quantity does remain in solution, the operation of the liquid tests, as formerly noticed under the head of each, will be materially modified. It is of some moment for the medical jurist to remember, that by reason of the slowness with which the changes in question sometimes takes place, the poison may exist abundantly in solution at one time, and yet be present only in small quantity after an interval of some hours or days.
Process for Organic Mixtures.—Various processes have been proposed for detecting corrosive sublimate in organic mixtures. The first I shall mention is one proposed by myself in former editions of this work. It is a double one; of which sometimes the first part, sometimes the second, sometimes both may be required. The first removes the corrosive sublimate undecomposed from the mixture, which may be accomplished when its proportion is considerable; the second, when the proportion of corrosive sublimate is too small to admit of being so removed, separates from the mixture metallic mercury; and the analyst will know which of the two to employ by using the protochloride of tin as a trial-test in the following manner.
A fluid mixture being in the first instance made, if necessary, by dividing and bruising all soft solids into very small fragments, and boiling the mass in distilled water, a small portion is to be filtered for the trial. If the protochloride of tin causes a pretty deep ash-gray or grayish-black colour, the first process may prove successful; if the shade acquired is not deep, that process may be neglected, and the second put in practice at once.
First branch of the Process.—In order to remove the corrosive sublimate undecomposed, the mixture, without filtration, is to be agitated for a few minutes with about a fourth part of its volume of sulphuric ether; which possesses the property of abstracting the salt from its aqueous solution. On remaining at rest for half a minute or a little more, the etherial solution rises to the surface, and may then be removed by suction with the pipette (Fig. 8). It is next to be filtered if requisite, evaporated to dryness, and the residue treated with boiling water; upon which a solution is procured that will present the properties formerly mentioned as belonging to corrosive sublimate in its dissolved state. This branch of the process is derived from one of Orfila's methods.
Second branch of the Process.—If the preceding method should
