.svg)
804.3 Parking place for caravans and motorised caravans
May be used only in combination with diagram 807
.svg)
804.4 Parking place for solo motor cycles
May be used only in combination with diagram 807
.svg)
969 Parking place for buses
7.6 Bay markings are normally used with the above signs (see table 7-1), although there might be circumstances where such markings are not required, e.g. within a lay—by. The sign to diagram 801, when used without a supplementary plate, does not require an order, but any bay marking with which it is used does. It is unusual to provide such an arrangement along the side of a road, as although it would indicate an area suitable for parking, it would otherwise have no more effect than if no signs or markings were provided at all. The situations where it would however be appropriate to make an order and use a bay marking with a sign to diagram 801 without a supplementary plate are:
(i) where echelon parking along the side of a road is required and the marking to diagram 1033 is used
(ii) in the centre of the carriageway where either diagram 1028.4 or 1033 would be used
(iii) in a controlled parking zone to indicate areas where there are no parking restrictions (see section 12).
The motor cycle bay (diagram 1028.4 with the appropriate legend) may be used without an upright sign (see para 7.1).
| Sign diagram no. |
Road marking diagram no. |
|---|---|
| 801 | 1028.4, 1032 or 1033, each with no legend |
| 801 plus 804.1 | 1028.3 with no legend |
| 801 plus 804.2 | 1028.4, 1032 or 1033, each with no legend |
| 801 plus 804.3 | 1028.4 with no legend |
| 801 | plus 804.4 1028.4 with no legend, or with the legend SOLO MOTORCYCLES ONLY, SOLO M/CYCLES ONLY or SOLO M/CS ONLY |
| 969 | 1028.3 with the legend BUSES |
7.7 Signs for cycle parking places are shown in diagrams 968 and 968.1. These have no permitted variants, are not used with road markings and do not require an order. They are generally associated with cycle racks and storage facilities.
55
