103 STAT. 2682 PROCLAMATION 5923—DEC. 14, 1988 (cc) A change to subheading 6812.30 through 6812.40 from any other subheading outside that group. (dd) A change to subheading 6812.50firomany other subheading. (ee) A change to subheadings 6812.60 through 6812.90 from any other subheading outside that group. (S) A change to heading 6813 from any other heading. (gg) A change to headings 7003 through 7006 from any other heading outside that group. (hh) A change to headings 7007 through 7020 from any other heading outside that group. (ii) A change to subheading 7019.20 from any other heading. [14] Section XIV: Chapter 71. (aa) A change from one chapter to another. (bh) A change to headings 7113 through 7118 fit>m any other heading outside that group, except that pearls, temporarily or permanently strung but without the addition of clasps or other ornamental features of precious metals or stones, shall be treated as a good of the country in which the pearls were obtained. [IS] Section XV: Chapters 72 through 83. (aa] A change from one chapter to another; provided, that goods subject to rules (ii) or (w) meet the conditions set forth therein. (bb) A change to headings 7206 through 7207 from any other heading outside that group. (cc) A change to headings 7208 through 7216 from any other heading outside that group. (dd) A change to heading 7217 from any other heading except headings 7213 through 7215. (ee) A change to headings 7218 through 7222 fixim any other heading outside that group. (ff) A change to heading 7223 from any other heading except headings 7221 and 7222. (gg) A change to headings 7224 through 7228 from any other heading outside that group. (hh) A change to heading 7229 from any other heading except headings 7227 and 7228. (ii) A change to heading 7308 from any other heading, except for changes resulting from the following processes performed on angles, shapes, or sections of heading 7216— drilling, punching, notching, cutting, cambering, or sweeping, whether performed individual- ly or in combination, adding attachments or weldments for composite construction, adding of attachments for handling purposes, addii)^ weldments, connectors, or attachments to H-sections or I-sections; provided, that the maximum cross-sectional dimension of the weldments, connectors, or attachments is not greater than the dimension between the inner surfaces of the flanges of the H-section or I- sections, painting, galvanizing, or otherwise coating, or adding a simple base plate without stiffening elements, individually or in combination with drilling, puncliing, notching, or cutting, to create an article suitable as a colimm. (})) A change to headings 7309 through 7326 from any other heading outside that group. (kk) A change to headings 7403 through 7408 frtim any other heading of chapter 74 outside that group; provided, with the exception of a change to subheading 7408.19, that the value of materials originating in the territory of Canada and/or the United States plus the direct cost of processing performed in the territory of Canada and/or the United States constitute not less than SO percent of the value of the goods when exported to the territory of the United States. (11) A change to heading 7409 from any other heading. (mm) A change to headings 7410 through 7419 from any other heading outside that group; provided, that with respect to a change to heading 7413, the value of materials originating in the territory of Canada and/or the United States plus the direct cost of processing per- formed in the territory of Canada and/or the United States constitute not less than 50 per- cent of the value of goods when exported to the territory of the United States. (nn) A change to heading 7505 from any other heading. (oo) A change to heading 7506 from any other heading. KV (pp) A change to subheading 7506.20.50 from any other subheading. (qq) A change to headings 7507 through 7508 from any other heading outside that group. (rr) A change to headings 7604 through 7606fix>many other heading outside that group.
�
