Page:United States Statutes at Large Volume 113 Part 3.djvu/606
113 STAT. 2124 PROCLAMATION 7210-JULY 22, 1999 The merchandise subject to this action is classified in the HTSUS at subheadings: 7210.20.0000, 7210.61.0000, 7210.69.0000, 7210.70.6090, 7210.90.6000, 7210.90.9000, 7212.40.1000, 7212.40.5000, 7212.50.0000, 7212.60.0000, 7225.99.0090, and 7226.99.0000. Other Metallic Coated Flat-Rolled Products reflect AISI category 34 (metallic sheet and strip). (5) Ralls are defined as the following: Ralls, whether or not used, for railway and tramway construction and replacement. This includes load-bearing rails such as standard T, light, crane, and girder rails, and conductor or electrical rails. The merchandise subject to this action Is classified in the HTSUS at subheadings: 7302.10.1010, 7302.10.1015, 7302.10.1025, 7302.10.X035, 7302.10.1045, 7302.10.1055, 7302.10.1065, 7302.10.1075, 7302.10.5020, 7302.10.5040, and 7302.10.5060. Rails reflect AISI categories 7 (standard rails), 8 (other rails), and 41 (used rails). (6) Certain Tin Mill Products are defined as the following: Hot-rolled or cold-rolled flat-rolled products, either in colls (regardless of dimension) or In straight lengths (if of a thiclcness less than 4.75 nm are of a width measuring at least 10 times the thic)cness or if of a thickness of 4.75 mm or more are of a width which exceeds 150 mm and measures at least twice the thickness), with a metallic plating of tin, chromium oxides, or chromium and chromium oxides, regardless of any additional coatings (e.g., paint, varnish, or plastics). The merchandise subject to this action is classified In the HTSUS at subheadings: 7210.11.0000, 7210.12.0000, 7210.50.0000, and 7212.10.0000. Certain Tin Mill Products reflect AISI categories 29 (tin plate) and 29A (tin-free sheet). (7) Electrical Sheet Products are defined as the following; Cold-rolled flat-rolled alloy steels, or that 'contain by weight at least 0.6 percent of silicon but not more than 6 percent of silicon and not more than 0.08 percent of carbon. They may also contain by weight not more than 1 percent of aluminum but no other element in a proportion that would give the steel the characteristics of another alloy steel.