TARIFF SCHEDULES OF THE UNITED STATES
SCHEDULE 6. - METALS AND METAL PRODUCTS Part 3. - Metal Products
296
Rates of Duty
Subpart D. - Nails, Screws, Bolts, and Other Fasteners; Locks; Builders' Hardware; Furniture, Luggage, and Saddlery Hardware Subpart D h e a d note s: I. The provisions o f t h i s subpart do not c o v e r articles c o a t e d or p l a t e d w i t h p r e c i o u s m e t a l s u n less such articles a r e s p e c i f i c a l l y i n c l u d e d therein.
646.04 646.06
Thumb tacks: Of two or more pieces of iron or steel, whether or not having heads coated or covered with plastics or other material Of copper Other
3.20 per lb 16% ad val. 0.90 per lb.
4.50 per lb. 45$^ ad val. 0.90 per lb.
646.15 646.17
Drive pins, studs, and other fasteners, all the foregoing, whether threaded or not threaded, suitable for use in powder-actuated hand tools: Not threaded Threaded
0.250 per lb. 15.5$^ ad val.
0.70 per lb. 45S^ ad val.
646.20
Staples in strip form
10 per lb.
20 per lb.
646.22
Corrugated fasteners, glaziers' points, hook nails, and ring nails
6^*6.02
646.25 646.26
646.27 646.28 646.30 646.32 646.34 646.36
646.40 646.41 646.42
646.45 646.47
Brads, nails, spikes, staples, and tacks, all the foregoing, not described in the foregoing provisions of this subpart, of base metal: Of iron or steel (except articles with heads of of nonferrous metals): Of one piece construction: Made of round wire: \ Under 1 inch in length artd under 0.065 inch in diameter 1 inch or more in length and 0.065 inch or more in diameter... Cut: Not over 2 inches in lehgth Over 2 inches in length Other Of two or more pieces Of copper Other
4 5 ^ ad val.
0.50 per lb.
0.750 per lb.
0.20 per lb.
0.40 per lb.
i>% ad val. 0.20 per lb. 1.20 per lb. 3.20 per lb. 165^ ad val. 1 9 % ad val.
1556 ad val. 0.40 per lb. 1.50 per lb. 4.50 per lb. 4 5 ^ ad val. kjt ad val.
Rivets of base metal: Of iron or steel and not brightened, not lathed, and not machined Other
0.50 per lb. l 4 ^ ad val.
10 per lb. 4 5 % ad val.
Cotters, cotter pins, and fasteners or holders (except nuts) used with screws, bolts, or studs, all the foregoing of base metal
195^ ad val.
45S^ ad val.
Furniture glides of base metal: Of two or more pieces of iron or steel Other
3.60 per lb. 1 5 $ ad val. 91
4.50 per lb. 4 5 % ad val.
�