Page:United States Statutes at Large Volume 93.djvu/287

From Wikisource
Jump to: navigation, search
This page needs to be proofread.
PUBLIC LAW 96-000—MMMM. DD, 1979

93 STAT. 255

PUBLIC LAW 96-39—JULY 26, 1979 533.76

533.78

533.79

Candy boxes, decanters, punchbowls, pretzel dishes, tidbit dishes, tiered servers, bonbon dishes, egg cups, spoons and spoon rests, oil and vinegar sets, tumblers, and salt and pepper shaker sets

22.5% ad val.

Cups valued over $8 per dozen; saucers valued over $5.25 per dozen; soups, oatmeals and cereals valued over $9.30 per dozen; plates not over 9 inches in maximum diameter and valued over $8.50 per dozen; plates over 9 but not over 11 inches in maximum diameter and valued over $11.50 per dozen; platters or chop dishes valued over $40 per dozen; sugars valued over $23 per dozen; creamers valued over $20 per dozen; and beverage servers valued over $50 per 18% ad val. dozen 26.1% ad Other articles

70% ad val.

75% ad val. 75% ad val.

val.

SEC. 510. TARIFF TREATMENT OF WATCHES.

Schedule 7, part 2, subpart E is amended— (1) by striking out subsection (a) in headnote 3 and redesignating subsections (b), (c), (d), (e), and (f) as (a), (b), (c), (d), and (e), rGSDGctivGlv (2) by striking out "items 717.--, 718.--, and 719.—." in headnote 3(b) (as redesignated by paragraph (1)) and inserting in lieu thereof "item 719.—.", (3) by striking out the last two sentences in headnote 3(b) (as redesignated by paragraph (1)) and inserting in lieu thereof the following: "For citation purposes, the two blanks on the end of such item number shall be mled in with the last two digits of the item number for the applicable base rate. Thus, 'item 719.31' would be the citation for a watch movement, 0.7 inch wide, having 17 jewels, which is adjusted or self-winding or constructed or designed to operate for a period in excess of 47 hours without rewinding.", (4) by striking out "in Arabic numerals and" in clauses (iii) and (iv) of headnote 4(a), (5) by amending headnote 4(e) to read as follows: "(e) Dials shall be marked to show the name of the country of manufacture.", (6) by amending items 716.10 through 716.26 to read as follows: 716.10

Not over 0.6 inch in width

90i each

$1.50 each

716.11

Over 0.6 but not over 0.8 inch in width 75t each

$1.50 each

716.12

Over 0.8 but not over 0.9 inch in width

716.13 716.14

,

75t each

$1.50 each

Over 0.9 but not over 1 inch m width 75^ each

$1.50 each

Over 1 but not over 1.2 inches in width

716.15

75( each

$1.50 each

75( each

$1.50 each

Over 1.2 but not over 1.5 inches in width

19 USC 1202.