from the Pacific coast is 90 feet, and the diameter 22 to 23 inches. Oregon fir is stronger than spruce or white pine, and hence less diameter is required for the same height. Spruce is in general use for the spars of smaller craft. Steel booms for racing yachts were first used on Defender and Valkyrie III.
The greatest improvements in the rigging of yachts of recent years have been the masthead shrouds, bridles on gaffs, and the comparatively new throat-halyard pennants. In a spanking breeze there is a great strain on the masthead, also much play, but by the adoption of the three devices mentioned the strains are both minimized and equalized. Large vessels carry double masthead shrouds, and smaller craft single ones. Vigilant was, I believe, the first American yacht to be fitted with them. Now they are carried by every craft of consequence. Gaff bridles and throat-halyard pennants are indispensable to the rigging of every racing yacht from the smallest cat to the largest schooner.
If your craft is large enough to spread two shrouds on each side, have them fitted in pairs. A bight and a good seizing are preferable to two single eyes.
The bowsprit-shroud outriggers or spreaders should be bolted fast to the ship without any hinged joint. This prevents any unnecessary play when the boat plunges bows under in a heavy head sea. There should be the same length of shroud between the spreader
