passes thru must be no wider than the distance between the flanges.
Another axle that has been mentioned is made of pipe. The pipe can be one inch in diameter, and must be drilled for the pins that fasten the spool to it. A three-eighths or five-sixteenths hole can be drilled near the end of the pipe outside the box, in which an iron rod is riveted with its outer end bent at a right angle. The rod forms the crank of the reel. If one has access to a heavy metal vise, the axle and crank can be made of one piece, Fig. 198. If one wishes the reel to run very easily, a washer that fits the axle nicely can be fastened to the side of the box with two screws, Fig. 199. The hole in the wood should be a little larger than the hole in the washer, thus making the washer a bearing for the axle. I have one that turns very freely this way. The wires running down to pegs in the ground, shown in Fig. 193, are for the purpose of anchoring the reel when the pull of the kite is on.
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Kitecraft and kite tournaments (1914).djvu/107}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
Fig. 198.
| An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Kitecraft and kite tournaments (1914).djvu/107}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. | |
Fig. 199.
| An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Kitecraft and kite tournaments (1914).djvu/107}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. | |
Figs. 200, 201, 202.
