sides from coming together. Four posts will be sufficient. No crank is necessary on this reel as a handle can be fastened to the side of one of the large discs. A brake can be attached underneath as in the last reel. The axle must be made very rigid in the standard as it has to support all the pull of the reel. This is a first class reel for fast work.
 | An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Kitecraft and kite tournaments (1914).djvu/109}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. |  |
Fig. 204.
| An image should appear at this position in the text. To use the entire page scan as a placeholder, edit this page and replace "{{missing image}}" with "{{raw image|Kitecraft and kite tournaments (1914).djvu/109}}". Otherwise, if you are able to provide the image then please do so. For guidance, see Wikisource:Image guidelines and Help:Adding images. | |
Fig. 205.
Discs can be obtained at some box factories for seven and ten cents apicie for sizes 1512" and 1912" in diameter, respectively. They are made of two ply wood and make good reels. A good way to get the holes opposite is to clamp the two discs together and bore all the holes thru both at the same time. Others make reels very much like our grandmothers' yarn reels. Two arms are halved together and short cross-pieces are attached to the ends, Fig. 204. For speed they are made with long arms and take up a good length of string at a single turn.
Another way of building up a reel is shown in Fig. 205. A square block has fans nailed or screwed to each side. The ends of the fans are shaped out to receive the kite line. The end of the square center piece can be rounded so as to pass thru a round hole of the framework, or a hole can be bored thru the square piece and a pipe or rod inserted as with the others. For heavy work where large string pulling kites
