Arts and Crafts Essays/Bookbinding

From Wikisource
Jump to navigation Jump to search
225253Arts and Crafts Essays — BookbindingWilliam MorrisThomas James Cobden-Sanderson


BOOKBINDING


MODERN bookbinding dates from the application of printing to literature, and in essentials has remained unchanged to the present day, though in those outward characteristics, which appeal to the touch and to the eye, and constitute binding in an artistic sense, it has gone through many changes for better and for worse, which, in the opinion of the writer, have resulted, in the main, in the exaggeration of technical skill and in the death of artistic fancy.


The first operation of the modern binder is to fold or refold the printed sheet into a section, and to gather the sections, numbered or lettered at the foot, in their proper order into a volume.

The sections are then taken, one by one, placed face downwards in a frame, and sewn through the back by a continuous thread running backwards and forwards along the backs of the sections to upright strings fastened at regular intervals in the sewing frame. This process unites the sections to one another in series one after the other, and permits the perusal of the book by the simple turning of leaf after leaf upon the hinge formed by the thread and the back of the section.

A volume, or series of sections, so treated, the ends of the string being properly secured, is essentially "bound"; all that is subsequently done is done for the protection or for the decoration of the volume or of its cover.

The sides of a volume are protected by millboards, called shortly "boards." The boards themselves and the back are protected by a cover of leather, vellum, silk, linen, or paper, wholly or in part. The edges of the volume are protected by the projection of the boards beyond them at top, bottom, and fore-edge, and usually by being cut smooth and gilt.

A volume so bound and protected may be decorated by tooling or otherwise upon all the exposed surfaces (upon the edges, the sides, and the back) and may be designated by lettering upon the back or the sides.

The degree in which a bound book is protected and decorated will determine the class to which the binding will belong.

(1) In cloth binding, the cover, called a "case," is made apart from the book, and is attached as a whole after the book is sewn.

(2) In half binding, the cover is built up for and on each individual book, but the boards of which it is composed are only partly covered with the leather or other material which covers the back.

(3) In whole binding, the boards are wholly covered with leather or other durable material, which in half binding covers only a portion of them.

(4) In extra binding, whole binding is advanced a stage higher by decoration. Of course in the various stages the details vary commensurately with the stage itself, being more or less elaborate as the stage is higher or lower in the scale.

The process of extra binding set out in more detail is as follows:—

(1) First the sections are folded or refolded.

(2) Then "end-papers"—sections of plain paper added at the beginning and end of the volume to protect the first and last, the most exposed, sections of printed matter constituting the volume proper—having been prepared and added, the sections are beaten, or rolled, or pressed, to make them "solid."

The end-papers are usually added at a later stage, and are pasted on, and not sewn, but, in the opinion of the writer, it is better to add them at this stage, and to sew them and not to paste them.

(3) Then the sections are sewn as already described.

(4) When sewn the volume passes into the hands of the "forwarder," who

(5) "Makes" the back, beating it round, if the back is to be round, and "backing" it, or making it fan out from the centre to right and left and project at the edges, to form a kind of ridge to receive and to protect the edges of the boards which form the sides of the cover.

(6) The back having been made, the "boards" (made of millboard, and originally of wood) for the protection of the sides are made and cut to shape, and attached by lacing into them the ends of the strings upon which the book has been sewn.

(7) The boards having been attached, the edges of the book are now cut smooth and even at the top, bottom, and fore-edge, the edges of the boards being used as guides for the purpose. In some cases the order is reversed, and the edges are first cut and then the boards.

(8) The edges may now be coloured and gilt, and if it is proposed to "gauffer" or to decorate them with tooling, they are so treated at this stage.

(9) The head-band is next worked on at head and tail, and the back lined with paper or leather or other material to keep the head-band in its place and to strengthen the back itself.

The book is now ready to be covered.

(10) If the book is covered with leather, the leather is carefully pared all round the edges and along the line of the back, to make the edges sharp and the joints free.

(11) The book having been covered, the depression on the inside of the boards caused by the overlap of the leather is filled in with paper, so that the entire inner surface may be smooth and even, and ready to receive the first and last leaves of the end-papers, which finally are cut to shape and pasted down, leaving the borders only uncovered.

Sometimes, however, the first and last leaves of the "end-papers" are of silk, and the "joint" of leather, in which case, of course, the end-papers are not pasted down, but the insides of the boards are independently treated, and are covered, sometimes with leather, sometimes with silk or other material.

The book is now "forwarded," and passes into the hands of the "finisher" to be tooled or decorated, or "finished" as it is called.

The decoration in gold on the surface of leather is wrought out, bit by bit, by means of small brass stamps called "tools."

The steps of the process are shortly as follows:—

(12) The pattern having been settled and worked out on paper, it is "transferred" to, or marked out on, the various surfaces to which it is to be applied.

Each surface is then prepared in succession, and, if large, bit by bit, to receive the gold.

(13) First the leather is washed with water or with vinegar.

(14) Then the pattern is pencilled over with "glaire" (white of egg beaten up and drained off), or the surface is wholly washed with it.

(15) Next it is smeared lightly with grease or oil.

(16) And, finally, the gold (gold leaf) is applied by a pad of cotton wool, or a flat thin brush called a "tip."

(17) The pattern, visible through the gold, is now reimpressed or worked with the tools heated to about the temperature of boiling water, and the unimpressed or waste gold is removed by an oiled rag, leaving the pattern in gold and the rest of the leather clear.

These several operations are, in England, usually distributed among five classes of persons.

(1) The superintendent or person responsible for the whole work.

(2) The sewer, usually a woman, who folds, sews, and makes the head-bands.

(3) The book-edge gilder, who gilds the edges. Usually a craft apart.

(4) The forwarder, who performs all the other operations leading up to the finishing.

(5) The finisher, who decorates and letters the volume after it is forwarded.

In Paris the work is still further distributed, a special workman (couvreur) being employed to prepare the leather for covering and to cover. In the opinion of the writer, the work, as a craft of beauty, suffers, as do the workmen, from the allocation of different operations to different workmen. The work should be conceived of as one, and be wholly executed by one person, or at most by two, and especially should there be no distinction between "finisher" and "forwarder," between "executant" and "artist."


The following technical names may serve to call attention to the principal features of a bound book.

(1) The back, the posterior edge of the volume upon which at the present time the title is usually placed. Formerly it was placed on the fore-edge or side.

The back may be (a) convex or concave or flat; (b) marked horizontally with bands, or smooth from head to tail; (c) tight, the leather or other covering adhering to the back itself, or hollow, the leather or other covering not so adhering; and (d) stiff or flexible.

(2) Edges, the three other edges of the book,—the top, the bottom, and the fore-edge.

(3) Bands, the cords upon which the book is sewn, and which, if not "let in" or embedded in the back, appear on it as parallel ridges. The ridges are, however, usually artificial, the real bands being "let in" to facilitate the sewing, and their places supplied by thin slips of leather cut to resemble them and glued on the back. This process also enables the forwarder to give great sharpness and finish to this part of his work, if he think it worth while.

(4) Between-bands, the space between the bands.

(5) Head and tail, the top and bottom of the back.

(6) The head-band and head-cap, the fillet of silk worked in buttonhole stitch at the head and tail, and the cap or cover of leather over it. The head-band had its origin probably in the desire to strengthen the back and to resist the strain when a book is pulled by head or tail from the shelf.

(7) Boards, the sides of the cover, stiff or limp, thick or thin, in all degrees.

(8) Squares, the projection of the boards beyond the edges of the book. These may be shallow or deep in all degrees, limited only by the purpose they have to fulfil and the danger they will themselves be exposed to if too deep.

(9) Borders, the overlaps of leather on the insides of the boards.

(10) Proof, the rough edges of leaves left uncut in cutting the edges to show where the original margin was, and to prove that the cutting has not been too severe.

The life of bookbinding is in the dainty mutation of its mutable elements—back, bands, boards, squares, decoration. These elements admit of almost endless variation, singly and in combination, in kind and in degree. In fact, however, they are now almost always uniformly treated or worked up to one type or set of types. This is the death of bookbinding as a craft of beauty.

The finish, moreover, or execution, has outrun invention, and is the great characteristic of modern bookbinding. This again, the inversion of the due order, is, in the opinion of the writer, but as the carving on the tomb of a dead art, and itself dead.

A well-bound beautiful book is neither of one type, nor finished so that its highest praise is that "had it been made by a machine it could not have been made better." It is individual; it is instinct with the hand of him who made it; it is pleasant to feel, to handle, and to see; it is the original work of an original mind working in freedom simultaneously with hand and heart and brain to produce a thing of use, which all time shall agree ever more and more also to call "a thing of beauty."

T. J. Cobden-Sanderson.