Adamson v. Gilliland/Opinion of the Court
This is a suit brought by the petitioner for the infringement of a patent for a vulcanizing device, 'including a vulcanizing member constructed to retain a combustible fluid upon and in contact with its upper surface, the lower surface of the vulcanizing member being adapted to be applied to the material to be vulcanized.' In other words, the upper side of the upper of two sheets of metal, between which, when heated, the material is to be vulcanized, is fashioned as a cup in which gasolene can be burned to heat it. The specific character of the machine has made of it a valuable success. The respondent admitted making and selling devices like the plaintiff's, but alleged and testified that he made them first. In a previous suit by the plaintiff, the plaintiff and the present defendant testified and District Judge Geiger gave the plaintiff a decree. In this case again the district judge in his turn saw the defendant and heard additional evidence, but, after criticizing it, said that his own judgment was that the new testimony would not have changed Judge Geiger's opinion, and, while professing to follow that opinion, according to the usage of district judges in such matters, evidently, to our mind, signified that he agreed with Judge Geiger, although in terms only following what had been done. The circuit court of appeals treated the action of the district judge as a mere yielding to the authority of the former decision, and reversed the decree upon the evidence as it stood in print.
We are unable to agree with the circuit court of appeals. There is no question that the plaintiff did not copy the defendant, that he put his invention into the market in November, 1911, and that the defendant did not put out his vulcanizer until February or March of the following year; but the defendant says that on August 7, 1911, twelve days before the plaintiff made the drawing that depicted his invention, he had had castings made that are substantially identical with the plaintiff's device and identical in particulars that the plaintiff's patent made material, but that the defendant declared to answer no useful end. The plaintiff's cup had pins projecting from the bottom, arranged in circles around a central one, which his specification described as serving to conduct the heat of the flame downwards into the vulcanizing plate and the combustible fluid. The defendant's original casting showed pins of similar arrangement. He explained that the similarity was accidental, that the pins were of no use, but that 'we expected to tell the poor, unsuspecting public that they conducted the heat . . . to the bottom of the vulcanizer,' 'which is a false statement.' It needs no emphasis to point out the improbability that the defendant, at nearly the same time as the plaintiff, should have hit by accident upon the same configuration in striking particulars that he regarded as immaterial, and, merely to deceive the public, have invented the same by no means obvious explanation that was offered seriously by the plaintiff, but that the defendant regarded as false. The improbability is intensified by a further coincidence also explained by the defendant as accident. The lugs by which the cup was to be fastened to the lower surface happened to face in opposite directions in the plaintiff's device, although later they were made to face the same way. The defendant's also faced in opposite directions. It surpasses the power of belief that a man who testified that there was nothing in the invention, that it was merely arranging to fasten a ladle to a board, should have come by pure chance to make so exact a replica of the plaintiff's specific form. Inspection of the two castings shows more clearly than can words that one must have been a copy of the other. The plaintiff and defendant lived far apart. Adamson had no chance to copy Gilliland. On the other hand, after Adamson's vulcanizers were made public, Gilliland could copy them. The man who made the castings shows that the resemblance was even more complete than we have stated, by reason of the presence of a base plate, although Gilliland denies that he had one at that time.
There is no doubt that the defendant had castings made. The essential question is the time when they first were made. We shall not discuss the evidence of those concerned in the making beyond recurring to the impression that the witnesses made upon the district judge, and mentioning that a dray ticket relied upon as fixing that date appears to have been open to grave suspicion from its character, marking, and other details. Considering that a patent has been granted to the plaintiff, the case is pre-eminently one for the application of the practical rule that so far as the finding of the master or judge who saw the witnesses 'depends upon conflicting testimony or upon the credibility of witnesses, or so far as there is any testimony consistent with the finding, it must be treated as unassailable.' Davis v. Schwartz, 155 U.S. 631, 636, 39 L. ed. 289, 291, 15 Sup. Ct. Rep. 237. The reasons for requiring the defendant to prove his case beyond a reasonable doubt are stated in the case of Barbed Wire Patent (Washburn & M. Mfg. Co. v. Beat 'Em All Barbed Wire Co.) 143 U.S. 275, 284, 36 L. ed. 154, 158, 12 Sup. Ct. Rep. 443, 450. Upon these considerations and a review of the evidence we are of opinion that the decree must be reversed.