Mold Web Course/Chapter 2/Lesson 3

From Wikisource
Jump to navigation Jump to search
Mold Web Course
the Environmental Protection Agency
Lesson 3: Humidity
4197354Mold Web Course — Lesson 3: Humiditythe Environmental Protection Agency

Lesson 3Humidity

click to enlarge

Sometimes, humidity or dampness (water vapor) in the air can supply enough moisture for mold growth. Indoor relative humidity (RH) should be kept below 60 percent — ideally between 30 percent and 50 percent, if possible. Low humidity may also discourage pests (such as cockroaches) and dust mites.

Humidity levels can rise in a building as a result of the use of humidifiers, steam radiators, moisture-generating appliances such as dryers, and combustion appliances such as stoves. Cooking and showering also can add to indoor humidity.

HVAC System
One function of the building heating, ventilation, and air conditioning (HVAC) system is to remove moisture from the air before the air is distributed throughout the building. If the HVAC system is turned off during or shortly after major cleaning efforts that involve a lot of water, such as mopping and carpet shampooing or cleaning, the humidity may rise greatly, and moisture or mold problems may develop.

click to enlarge
Condensation

Condensation can be a sign of high humidity. When warm, humid air contacts a cold surface, condensation may form. (To see this, remove a cold bottle of water from a refrigerator and take it outside on a hot day. Typically, condensation will form on the outside of the bottle.) Humidity can be measured with a humidity gauge or meter; models that can monitor both temperature and humidity are generally available for less than $50 at hardware stores or on the Internet.