Mold Web Course/Chapter 4/Knowledge Test

From Wikisource
Jump to navigation Jump to search
Mold Web Course
the Environmental Protection Agency
Chapter 4 Knowledge Test
4202401Mold Web Course — Chapter 4 Knowledge Testthe Environmental Protection Agency

Knowledge Test
Lesson 1 Dry Quickly
Question 1: Quick action to address a moisture problem may make an extensive mold remediation effort unnecessary.
A.True
B.False

Lesson 1 Dry Quickly
Question 2: Which of the following types of materials may have to be discarded when contaminated with mold or mold spores?
A.Hard surfaces such as linoleum or tile
B.Cellulose or fiberglass insulation
C.Plastics and metals
D.All of the above

Lesson 2 Assess Mold Problem
Question 3: It is important to assess the size and extent of the mold problem before starting remediation.
A.True
B.False

Lesson 2 Assess Mold Problem
Question 4: You should consider using personal protective equipment (PPE) if disturbing mold during a building assessment.
A.True
B.False

Lesson 2 Assess Mold Problem
Question 5: Minimum PPE includes:
A.N‐95 respirator
B.Gloves
C.Hat
D.Goggles
E.A, B, and D
Lesson 3 Remediation Plan
Question 6: A remediation plan should cover:
A.The containment and removal techniques to be used to avoid the spread of mold
B.The use of PPE
C.Steps to correct moisture or water problems in order to prevent the recurrence of mold
D.All of the above

Lesson 4 Mold Remediation Procedures
Question 7: Remediation and cleanup activities should be scheduled for off-hours, when building occupants are less likely to be affected.
A.True
B.False?

Answer Key

Question 1: Answer: “A” TRUE
A dry item before mold grows, if possible. In most cases, mold will not grow if wet or damp items are dried within 24‐48 hours. www.epa.gov/mold/moldcourse/chapter4.html#4.1

Question 2: Answer: “B” Cellulose or fiberglass insulation
Some water‐damaged items, including ceiling tiles, cellulose and fiberglass insulation, drywall and gypsum board, and books and papers, may have to be discarded. If valuable or important books, documents, or other items are moldy or water damaged, you may wish to consult a restoration, water damage, or remediation expert. www.epa.gov/mold/moldcourse/chapter4.html#4.1

Question 3: Answer: “A” TRUE
Before planning a remediation effort, the size and extent of the mold problem and any continuing moisture problems should be assessed. A remediation generally can be divided into small (less than 10 square feet of mold), medium (10‐ 100 square feet of mold), and large jobs (more than 100 square feet of mold). www.epa.gov/mold/moldcourse/chapter4.html#4.2

Question 4: Answer: “A” TRUE
Remediating mold and moisture problems may be complex, and it may increase workers' exposure to mold unless personal protective equipment (PPE) is used. www.epa.gov/mold/moldcourse/chapter4.html#4.2

Question 5: Answer: “E” N‐95 respirator, Gloves, and Goggles
Consider using PPE if disturbing mold during a building inspection, assessment, or walkthrough, for example. The minimum PPE is an N‐95 respirator (available at most hardware stores), gloves, and goggles. www.epa.gov/mold/moldcourse/chapter4.html#4.2

Question 6: Answer: “D” All of the above
The remediation plan should include: Whether containment will be required; what level of PPE will be used; how the water or moisture problem will be fixed so the mold problem does not recur; and, how the moldy building materials will be removed to avoid spreading mold. www.epa.gov/mold/moldcourse/chapter4.html#4.3

Question 8: Answer: “A” TRUE
If possible, remediation activities should be scheduled during off‐hours, when building occupants are less likely to be affected. www.epa.gov/mold/moldcourse/chapter4.html#4.4