Page:A History of Wood-Engraving.djvu/157

From Wikisource
Jump to navigation Jump to search
This page has been validated.
A HISTORY OF WOOD-ENGRAVING
155


near Newcastle in 1753. He passed his boyhood in rude country life and received scanty schooling. At fourteen he was bound apprentice to the Newcastle engraver, Ralph Beilby; nine years later he went to seek his fortune in London, where he impatiently endured city life for less than a year; in the summer of 1777 he returned to his old master, with whom he went into partnership. Some preliminary training in book-illustration of the rude sort then in vogue was necessary to reveal his powers to himself; he received a premium from the Society for the Encouragement of Arts, which had shown some interest in wood-engraving; and after farther minor work he began, in 1785, to engrave the first block for his British Quadrupeds, which, with his British Birds, although his other cuts are numbered by thousands, is the principal monument of his genius. When he took the graver in his hand he found the art extinct as a fine art; at most only large coarse prints were manufactured. Besides his great service to the art in introducing the white line he substituted boxwood for the pear or other soft wood of the earlier blocks, and he engraved across the grain instead of with it, or “the plank way of the wood,” as he called it; he also began the practice of lowering the surface of the block in places where less color was desired, so that less pressure would come upon those parts in printing (a device which Aldegrever is believed to have resorted to in some of his works), and he used the dabber instead of the inking-roller.

By such means he was truly, as Ruskin says, “a reformer”—Ruskin adds, “as stout as Holbein, or Botticelli, or Luther, or Savonarola,” and this is also true within limits. But if in relation to his art, and in answer to the tests re-