This page has been validated.
HOW TO MAKE BLOUSES
exactly follow the line of the neck, when it is lapped over the other side of the blouse.
_-_Fig_33.png)
Fig. (33) To add the right slant to the neck of the pattern
In order to get just the right slant on this portion, put a piece of paper under the diagram and trace along the dotted line AB, the center-front line and the lower edge for a few inches. Remove, the paper and cut along the traced lines. Then, place this piece on top of the diagram over lines CD and EF, with the center-front along the center-front line of the diagram. (See Fig. 33.) Thumb tack it in place and mark along the top across the line CD.
[ 27 ]
