Page:Cyclopedia of Painting-Armstrong, George D (1908).djvu/333

From Wikisource
Jump to navigation Jump to search
This page has been validated.

SCENE PAINTING.

When purchasing any burlaps to paint the scenery on, confine the selection to a good article, which should not be too thick, and should be of a close texture, evenly woven and light. The stoutness should, however, be increased for very large scenes or drops. In place of burlaps, stout unbleached muslin is frequently employed, but it does not by any means answer so well.

With respect to the width of the canvas, that which is manufactured two yards wide is the most preferable, as the scene will not require so many seams. For ordinary scenery these seams should always run horizontally, but for a moving panorama they must assume a perpendicular direction, since the canvas on which it is represented has to be unrolled from a cylinder placed vertically on the stage at the time of exhibition.

These are the most needful articles to begin with: A common iron or tin kettle, in shape resembling a fish kettle, to melt the size in and a ladle to pour it out when required for use; an earthenware pan, about fifteen or eighteen inches in diameter, to contain the whiting that has been moistened and made fit for use; about four dozen earthenware paint pots, from the smallest to the largest; a grindstone and muller, or what would do still better, a grinding color mill; a large palette knife; a good sized sponge; a plumb line; some chalk and a couple of chalk lines; some common charcoal, of which only the softest and finest pieces are to be selected; some drawing charcoal, the large French is the best; a couple of pounce bags. These can be made in the following manner: Take a piece, about eight inches square, of very open canvas, of an old stocking, or of any

325