Page:EB1911 - Volume 05.djvu/273

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
260
CAPILLARY ACTION
  

form , that is to say, the difference between the energy in two different states. The only cases, however, in which we have experimental values of this quantity are when the substance is either liquid and surrounded by similar liquid, or gaseous and surrounded by similar gas. It is impossible to make direct measurements of the properties of particles of the substance within the insensible distance ε of the bounding surface.

When a liquid is in thermal and dynamical equilibrium with its vapour, then if and are the values of and for the vapour, and and those for the liquid,

(21)

where is the dynamical equivalent of heat, is the latent heat of unit of mass of the vapour, and is the pressure. At points in the liquid very near its surface it is probable that is greater than , and at points in the gas very near the surface of the liquid it is probable that is less than , but this has not as yet been ascertained experimentally. We shall therefore endeavour to apply to this subject the methods used in Thermodynamics, and where these fail us we shall have recourse to the hypotheses of molecular physics.

We have next to determine the value of in terms of the action between one particle and another. Let us suppose that the force between two particles and at the distance is

(22)

being reckoned positive when the force is attractive. The actual force between the particles arises in part from their mutual gravitation, which is inversely as the square of the distance. This force is expressed by . It is easy to show that a force subject to this law would not account for capillary action. We shall, therefore, in what follows, consider only that part of the force which depends on , where is a function of which is insensible for all sensible values of , but which becomes sensible and even enormously great when is exceedingly small.

If we next introduce a new function of and write

(23)

then will represent—(1) The work done by the attractive force on the particle , while it is brought from an infinite distance from to the distance from ; or (2) The attraction of a particle on a narrow straight rod resolved in the direction of the length of the rod, one extremity of the rod being at a distance from , and the other at an infinite distance, the mass of unit of length of the rod being . The function is also insensible for sensible values of , but for insensible values of it may become sensible and even very great.

If we next write

(24)

then will represent—(1) The work done by the attractive force while a particle is brought from an infinite distance to a distance from an infinitely thin stratum of the substance whose mass per unit of area is ; (2) The attraction of a particle placed at a distance from the plane surface of an infinite solid whose density is .

EB1911 Capillary Fig. 2.jpg Fig. 2

Let us examine the case in which the particle is placed at a distance from a curved stratum of the substance, whose principal radii of curvature are and . Let (fig. 2) be the particle and a normal to the surface. Let the plane of the paper be a normal section of the surface of the stratum at the point , making an angle with the section whose radius of curvature is . Then if is the centre of curvature in the plane of the paper, and ,

(25)

Let ,

(26)

The element of the stratum at Q may be expressed by

or expressing in terms of by (26),

Multiplying this by and by , we obtain for the work done by the attraction of this element when is brought from an infinite distance to ,

Integrating with respect to from to , where a is a line very great compared with the extreme range of the molecular force, but very small compared with either of the radii of curvature, we obtain for the work

and since is an insensible quantity we may omit it. We may also write

since is very small compared with , and expressing in terms of by (25), we find


This then expresses the work done by the attractive forces when a particle is brought from an infinite distance to the point at a distance from a stratum whose surface-density is , and whose principal radii of curvature are and .

To find the work done when is brought to the point in the neighbourhood of a solid body, the density of which is a function of the depth below the surface, we have only to write instead of , and to integrate

where, in general, we must suppose a function of . This expression, when integrated, gives (1) the work done on a particle while it is brought from an infinite distance to the point , or (2) the attraction on a long slender column normal to the surface and terminating at , the mass of unit of length of the column being . In the form of the theory given by Laplace, the density of the liquid was supposed to be uniform. Hence if we write

the pressure of a column of the fluid itself terminating at the surface will be

and the work done by the attractive forces when a particle is brought to the surface of the fluid from an infinite distance will be


If we write

then will express the work done by the attractive forces, while a particle is brought from an infinite distance to a distance from the plane surface of a mass of the substance of density and infinitely thick. The function is insensible for all sensible values of . For insensible values it may become sensible, but it must remain finite even when , in which case .

If is the potential energy of unit of mass of the substance in vapour, then at a distance from the plane surface of the liquid

At the surface

At a distance within the surface


If the liquid forms a stratum of thickness c, then


The surface-density of this stratum is . The energy per unit of area is

Since the two sides of the stratum are similar the last two terms are equal, and

Differentiating with respect to , we find

Hence the surface-tension

Integrating the first term within brackets by parts, it becomes

Remembering that is a finite quantity, and that , we find

(27)

When is greater than this is equivalent to in the equation of Laplace. Hence the tension is the same for all films thicker than , the range of the molecular forces. For thinner films

Hence if is positive, the tension and the thickness will increase together. Now represents the attraction between a particle and the plane surface of an infinite mass of the liquid, when the distance of the particle outside the surface is . Now, the force between the particle and the liquid is certainly, on the whole, attractive; but if between any two small values of it should be repulsive, then for films whose thickness lies between these values the tension will increase as the thickness diminishes, but for all other cases the tension will diminish as the thickness diminishes.

We have given several examples in which the density is assumed to be uniform, because Poisson has asserted that capillary