Page:EB1911 - Volume 08.djvu/167

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
152
DIAL
  

meridian. Through E, the centre of the sphere, draw a vertical plane facing south. This will cut the sphere in the great circle ZMA, which, being vertical, will pass through the zenith, and, facing south, will be at right angles to the meridian. Let QMa be the equatorial circle, obtained by drawing a plane through E at right angles to the axis PEp. The lower portion Ep of the axis will be the style, the vertical line EA in the meridian plane will be the XII o’clock line, and the line EM, which is obviously horizontal, since M is the intersection of two great circles ZM, QM, each at right angles to the vertical plane QZP, will be the VI o’clock line. Now, as in the previous problem, divide the equatorial circle into 24 equal arcs of 15° each, beginning at a, viz. ab, bc, &c.,—each quadrant aM, MQ, &c., containing 6,—then through each point of division and through the axis Pp draw a plane cutting the sphere in 24 equidistant great circles. As the sun revolves round the axis the shadow of the axis will successively fall on these circles at intervals of one hour, and if these circles cross the vertical circle ZMA in the points A, B, C, &c., the shadow of the lower portion Ep of the axis will fall on the lines EA, EB, EC, &c., which will therefore be the required hour-lines on the vertical dial, Ep being the style.

Fig. 4

There is no necessity for going beyond the VI o’clock hour-line on each side of noon; for, in the winter months the sun sets earlier than 6 o’clock, and in the summer months it passes behind the plane of the dial before that time, and is no longer available.

It remains to show how the angles AEB, AEC, &c., may be calculated.

The spherical triangles pAB, pAC, &c., will give us a simple rule. These triangles are all right-angled at A, the side pA, equal to ZP, is the co-latitude of the place, that is, the difference between the latitude and 90°; and the successive angles ApB, ApC, &c., are 15°, 30°, &c., respectively. Then

tan AB=tan 15° sin co-latitude;

or more simply,

tan AB=tan 15° cos latitude,
tan AC=tan 30° cos latitude,
&c. &c.

and the arcs AB, AC so found are the measure of the angles AEB, AEC, &c., required.

In this ease the angles diminish as the latitudes increase, the opposite result to that of the horizontal dial.

Inclining, Reclining, &c., Dials.—We shall not enter into the calculation of these cases. Our imaginary sphere being, as before supposed, constructed with its centre at the centre of the dial, and all the hour-circles traced upon it, the intersection of these hour-circles with the plane of the dial will determine the hour-lines just as in the previous cases; but the triangles will no longer be right-angled, and the simplicity of the calculation will be lost, the chances of error being greatly increased by the difficulty of drawing the dial plane in its true position on the sphere, since that true position will have to be found from observations which can be only roughly performed.

In all these cases, and in cases where the dial surface is not a plane, and the hour-lines, consequently, are not straight lines, the only safe practical way is to mark rapidly on the dial a few points (one is sufficient when the dial face is plane) of the shadow at the moment when a good watch shows that the hour has arrived, and afterwards connect these points with the centre by a continuous line. Of course the style must have been accurately fixed in its true position before we begin.

Equatorial Dial.—The name equatorial dial is given to one whose plane is at right angles to the style, and therefore parallel to the equator. It is the simplest of all dials. A circle (fig. 5) divided into 24 equal ares is placed at right angles to the style, and hour divisions are marked upon it. Then if care be taken that the style point accurately to the pole, and that the noon division coincide with the meridian plane, the shadow of the style will fall on the other divisions, each at its proper time. The divisions must be marked on both sides of the dial, because the sun will shine on opposite sides in the summer and in the winter months, changing at each equinox.

To find the Meridian Plane.—We have, so far, assumed the meridian plane to be accurately known; we shall proceed to describe some of the methods by which it may be found.

Fig. 5

The mariner’s compass may be employed as a first rough approximation. It is well known that the needle of the compass, when free to move horizontally, oscillates upon its pivot and settles in a direction termed the magnetic meridian. This does not coincide with the true north and south line, but the difference between them is generally known with tolerable accuracy, and is called the variation of the compass. The variation differs widely at different parts of the surface of the earth, and is not stationary at any particular place, though the change is slow; and there is even a small daily oscillation which takes place about the mean position, but too small to need notice here (see Magnetism, Terrestrial).

With all these elements of uncertainty, it is obvious that the compass can only give a rough approximation to the position of the meridian, but it will serve to fix the style so that only a small further alteration will be necessary when a more perfect determination has been made.

A very simple practical method is the following:—

Place a table (fig. 6), or other plane surface, in such a position that it may receive the sun’s rays both in the morning and in the afternoon. Then carefully level the surface by means of a spirit-level. This must be done very accurately, and the table in that position made perfectly secure, so that there be no danger of its shifting during the day.

Next, suspend a plummet SH from a point S, which must be rigidly fixed. The extremity H, where the plummet just meets the surface, should be somewhere near the middle of one end of the table. With H for centre, describe any number of concentric arcs of circles, AB, CD, EF, &c.

A bead P, kept in its place by friction, is threaded on the plummet line at some convenient height above H.

Fig. 6

Everything being thus prepared, let us follow the shadow of the bead P as it moves along the surface of the table during the day. It will be found to describe a curve ACE . . . FDB, approaching the point H as the sun advances towards noon, and receding from it afterwards. (The curve is a conic section—an hyperbola in these regions.) At the moment when it crosses the arc AB, mark the point A; AP is then the direction of the sun, and, as AH is horizontal, the angle PAH is the altitude of the sun. In the afternoon mark the point B where it crosses the same arc; then the angle PBH is the altitude. But the right-angled triangles PHA, PHB are obviously equal; and the sun has therefore the same altitudes at those two instants, the one before, the other after noon. It follows that, if the sun has not changed its declination during the interval, the two positions will be symmetrically placed one on each side of the meridian. Therefore, drawing the chord AB, and bisecting it in M, HM will be the meridian line.

Each of the other concentric arcs, CD, EF, &c., will furnish its meridian line. Of course these should all coincide, but if not, the mean of the positions thus found must be taken.

The proviso mentioned above, that the sun has not changed its declination, is scarcely ever realized; but the change is slight, and may be neglected, except perhaps about the time of the equinoxes, at the end of March and at the end of September. Throughout the remainder of the year the change of declination is so slow that we may safely neglect it. The most favourable times are at the end of June and at the end of December, when the sun’s declination is almost stationary. If the line HM be produced both ways to the edges of the table, then the two points on the ground vertically below those on the edges may be found by a plummet, and, if permanent marks be made there, the meridian plane, which is the vertical plane passing through these two points, will have its position perfectly secured.