depend mostly upon one or other of two processes; either the precipitation of the tannin by means of gelatin, or its absorption by means of prepared hide. Sir Humphry Davy was the first to propose a method for analysing tanning materials, and he precipitated the tannin by means of gelatin in the presence of alum, then dried and weighed the precipitate, after washing free from excess of reagents. This method was improved by Stoddart, but cannot lay claim to much accuracy. Warington and Müller again modified the method, but their procedure being tedious and difficult to work could not be regarded as a great advance. Wagner then proposed precipitation by means of the alkaloids, with special regard to cinchonine sulphate in the presence of rosaniline acetate as indicator, but this method also proved useless. After this many metallic precipitants were tried, used gravimetrically and volumetrically, but without success. The weighing of precipitated tannates will never succeed, because the tannins are such a diverse class of substances that each tannin precipitates different quantities of the precipitants, and some materials contain two or three different tannins. Then there are also the difficulties of incomplete precipitation and the precipitation of colouring matter, &c. Among this class of methods may be mentioned Garland’s, in which tartar emetic and sal ammoniac were employed. It was improved by Richards and Palmer.
Another class of methods depends upon the destruction of the tannin by some oxidizing agent, and the estimation of the amount required. Terreil rendered the tannin alkaline, and after agitating it with a known quantity of air, estimated the volume of oxygen absorbed. The method was slow and subject to many sources of error. Commaille oxidized with a known quantity of iodic acid and estimated the excess of iodate. This process also was troublesome, besides oxidizing the gallic acid (as do all the oxidation processes), and entailing a separate estimation of them after the removal of the tannin. Ferdinand Jean (1877) titrated alkaline tannin solution with standard iodine, but the mixture was so dark that the end reaction with starch could not be seen; in addition the gallic acid had again to be estimated. Monier proposed permanganate as an oxidizing agent, and Lowenthal made a very valuable improvement by adding indigo solution to the tannin solution, which controlled the oxidation and acted as indicator. This method also required double titration because of the gallic acid present, the tanning matters being removed from solution by means of gelatin and acidified salt.
The indirect gravimetric hide-powder method first took form about 1886. It was published in Der Gerber by Simand and Weiss, other workers being Eitner and Meerkatz. Hammer, Muntz and Ramspacher did some earlier work on similar lines, depending upon the specific gravity of solutions. Professor H. R. Procter perfected this method by packing a bell, similar in shape to a bottomless bottle of about 2 oz. (liq.) capacity, with the hide-powder, and siphoning the tan liquor up through the powder and over into a receiver. This deprives the tan liquor of tannin, and a portion of this non-tannin solution is evaporated to dryness and weighed till constant; similarly a portion of the original solution containing non-tannins and tannins is evaporated and weighed till constant; then the weight of the non-tannins subtracted from the weight of the non-tannins and tannins gives the weight of tannin, which is calculated to percentage on original solutions. This method was adopted as official by the International Association of Leather Trades Chemists until September 1906, when its faults were vividly brought before them by Gordon Parker of London and Bennett of Leeds, working in collaboration, although other but not so complete work had been previously done to the same end. The main faults of the method were that the hide-powder absorbed non-tannins, and therefore registered them as tannins, and the hide-powder was partially soluble. This difficulty has now been overcome to a large extent in the present official method of the I.A.L.T.C.
Meanwhile, Parker and Munro Payne proposed a new method of analysis, the essence of which is as follows:—A definite excess of lime solution is added to a definite quantity of tannin solution and the excess of lime estimated; the tan solution is now deprived of tannin by means of a soluble modification of gelatin, called “collin,” and the process is repeated. Thus we get two sets of figures, viz. total absorption and acid absorption (i.e. acids other than tan); the latter subtracted from the former gives tannin absorption, and this is calculated out in percentage of original liquor. The method failed theoretically, because a definite molecular weight had to be assumed for tannins which are all different. There are also several other objections, but though, like the hide-powder method, it is quite empirical, it gives exceedingly useful results if the rules for working are strictly adhered to.
The present official method of the I.A.L.T.C. is a modification of the American official method, which is in turn a modification of a method proposed by W. Eitner, of the Vienna Leather Research Station. The hide-powder is very slightly chrome-tanned with a basic solution of chromium chloride, 2 grammes of the latter being used per 100 grammes of hide-powder, and is then washed free from soluble salts and squeezed to contain 70% of moisture, and is ready for use. This preliminary chroming does away with the difficulty of the powder being soluble, by rendering it quite insoluble; it also lessens the tendency to absorb non-tannins. Such a quantity of this wet powder as contains 6.5 grammes of dry hide is now taken, and water is added until this quantity contains exactly 20 grammes of moisture, i.e. 26.5 grammes in all; it is then agitated for 15 minutes with 100 c.c. of the prepared tannin solution, which is made up to contain tannin within certain definite limits, in a mechanical rotator, and filtered. Of this non-tannin solution 50 c.c. is then evaporated to dryness. The same thing is done with 50 c.c. of original solution containing non-tannins and tannins, and both residues are weighed. The tannin is thus determined by difference. The method does all that science can do at present. The rules for carrying out the analysis are necessarily very strict. The object in view is that all chemists should get exactly concordant results, and in this the I.A.L.T.C. has succeeded.
The work done by Wood, Trotman, Procter, Parker and others on the alkaloidal precipitation of tannin deserves mention.
Heavy Leathers.—The hides of oxen are received in the tanyard in four different conditions: (1) market or slaughter hides, which, coming direct from the local abattoirs, are soft, moist and covered with dirt and blood; (2) wet salted hides; (3) dry salted hides; (4) sun-dried or “flint” hides—the last three forms being the condition in which the imports of foreign hides are made. The first operation in the tannery is to clean the hides and bring them back as nearly as possible to the flaccid condition in which they left the animal’s back. The blood and other matter on market hides must be removed as quickly as possible, the blood being of itself a cause of dark stains and bad grain, and with the other refuse a source of putrefaction. When the hides are sound they are given perhaps two changes of water.
Salted hides need a longer soaking than market hides, as it is not only essential to remove the salt from the hide, but also necessary to plump and soften the fibre which has been partially dehydrated and contracted by the salt. It must also be borne in mind that a 10% solution of salt dissolves hide substance, thereby causing an undesirable loss of weight, and a weak solution prevents plumping, especially when taken into the limes, and may also cause “buckling,” which cannot easily be removed in after processes. Dried and dry salted hides require a much longer soaking than any other variety. Dried hides are always uncertain, as they may have putrefied before drying, and also may have been dried at too high a temperature; in the former case they fall to pieces in the limes, and in the latter case it is practically impossible to soak them back, unless putrefactive processes are used, and such are always dangerous and difficult to work because of the Rivers Pollution Acts. Prolonged soaking in cold water dissolves a serious amount of hide substance. Soaking in brine may be advantageous, as it prevents putrefaction to some extent. Caustic soda, sodium sulphide and sulphurous acid may also be advantageously employed on account of their softening and antiseptic action. In treating salted goods, the first wash water should always be rapidly changed, because, as mentioned, strong salt solutions dissolve hide; four changes of water should always be given to these goods.
![]() |
Fig. 2.—Double-acting Stocks. |
There are other and mechanical means of softening obstinate material, viz. by stocking. The American hide mill, or double-acting stocks, shown diagrammatically in fig. 2, is a popular piece of apparatus, but the goods should never be subjected to violent mechanical treatment until soft enough to stand it, else severe grain cracking may result. Perhaps the use of sodium sulphide or caustic soda in conjunction with the American wash wheel is the safest method.
Whatever means are used the ultimate object is first to swell and open up the fibres as much as possible, and secondly to remove putrefactive refuse and dirt, which if left in is fixed by the lime in the process of depilation, and causes a dirty buff.
After being thus brought as nearly as possible into a uniform condition, all hides are treated alike. The first operation to which they are subjected is depilation, which removes not only the hair but also the scarf skin or epidermis. When the goods are sent to the limes for depilation they are, first of all, placed in an old lime, highly charged with organic matter and bacteria. It is the common belief that the lime causes the hair to loosen and fall out, but this is not so; in fact, pure lime has the opposite