lace. An example of dainty Brussels pillow lace is given in fig. 42. In the Brussels pillow lace a delicate modelling effect is often imparted to the close textures of the flowers by means of pressing them with a bone instrument which gives concave shapes to petals and leaves, the edges of which consist in part of slightly raised cordonnet of compact plaited work.
![]() |
Fig. 40.—Border of Pillow-made Lace, Mechlin, end of the |
![](http://upload.wikimedia.org/wikipedia/commons/thumb/2/24/1911_Britannica_-_Lace_41.jpg/150px-1911_Britannica_-_Lace_41.jpg)
Fig. 41.—Enlargement of Brussels Mesh.
Honiton pillow lace resembles Brussels lace, but in most of the English pillow laces (Devonshire, Buckinghamshire, Bedfordshire) the réseau is of a simple character (fig. 43). As a rule, English lace is made with a rather coarser thread than that used in the older Flemish laces. In real Flemish Valenciennes lace there are no twisted sides to the mesh; all are closely plaited (fig. 44) and as a rule the shape of the mesh is diamond but without the openings as shown in fig. 44. No outline or cordonnet to define the pattern is used in Valenciennes lace (see fig. 45). Much lace of the Valenciennes type (fig. 54) is made at Ypres. Besides these distinctive classes of pillow-like laces, there are others in which equal care in plaiting and twisting threads is displayed, though the character of the design is comparatively simple, as for instance in ordinary pillow laces from Italy, from the Auvergne, from Buckinghamshire, or rude and primitive as in laces from Crete, southern Spain and Russia. Pillow lace-making in Crete is now said to be extinct. The laces were made chiefly of silk. The patterns in many specimens are outlined with one, two or three bright-coloured silken threads. Uniformity in simple character of design may also be observed in many Italian, Spanish, Bohemian, Swedish and Russian pillow laces (see the lower edge of fig. 46).
![](http://upload.wikimedia.org/wikipedia/commons/thumb/a/a5/1911_Britannica_-_Lace_45.jpg/170px-1911_Britannica_-_Lace_45.jpg)
Fig. 45.—Lappet of delicate Pillow-made Lace, Valenciennes, about 1750. The peculiarity of Valenciennes lace is the filmy cambric-like texture and the absence of any cordonnet to define the separate parts of the ornament such as is used in needlepoint lace of Alençon, and in pillow Mechlin and Brussels lace.
Guipure.—This name is often applied to needlepoint and pillow laces in which the ground consists of ties or brides, but it more properly designates a kind of lace or “passementerie,” made with gimp of fine wires whipped round with silk, and with cotton thread. An earlier kind of gimp was formed with “Cartisane,” a little strip of thin parchment or vellum covered with silk, gold or silver thread. These stiff gimp threads, formed into a pattern, were held together by stitches worked with the needle. Gold and silver thread laces have been usually made on the pillow, though gold thread has been used with fine effect in 17th-century Italian needlepoint laces.
Machine-made Lace.—We have already seen that a technical peculiarity in making needlepoint lace is that a single thread and needle are alone used to form the pattern, and that the buttonhole stitch and other loopings which can be worked by means of a needle and thread mark a distinction between lace made in this manner and lace made on the pillow. For the process of pillow lace making a series of threads are in constant employment, plaited and twisted the one with another. A buttonhole stitch is not producible by it. The Leavers lace machine does not make either a buttonhole stitch or a plait. An essential principle of this machine-made work is that the threads are twisted together as in stocking net. The Leavers lace machine is that generally in use at Nottingham and Calais. French ingenuity has developed improvements in this machine whereby laces of delicate thread are made; but as fast as France makes an improvement England follows with another, and both countries virtually maintain an equal position in this branch of industry. The number of threads brought into operation in a Leavers machine is regulated by the pattern to be produced, the threads being of two sorts, beam or warp threads