bolts must therefore have taken place during the last quarter of the preceding revolution; but it is during that quarter of a turn that the carriages are effected in the second and fourth rows. Since the bolts which drive the dials of the first, third, and fifth rows, have no mechanical connexion with the dials in the second and fourth rows, there is nothing in the process of shooting those bolts incompatible with that of moving the dials of the second and fourth rows: hence these two processes may both take place during the same quarter of a turn. But in order to equalize the resistance to the moving power, the same expedient is here adopted as that already described in the process of carrying. The arms which shoot the bolts of each row of dials are arranged spirally, so as to act successively throughout the quarter of a turn. There is, however, a contingency which, under certain circumstances, would here produce a difficulty which must be provided against. It is possible, and in fact does sometimes happen, that the process of carrying causes a dial to move under the index from 0 to 1. In that case, the bolt, preparatory to the next addition, ought not to be shot until after the carriage takes place; for if the arm which shoots it passes its point of action before the carriage takes place, the bolt will be moved out of its sphere of action, and will not be shot, which, as we have already explained, must always happen when 0 is at the index: therefore no addition would in this case take place during the next quarter of a turn of the axis; whereas, since 1 is brought to the index by the carriage, which immediately succeeds the passage of the arm which ought to bolt, 1 should be added during the next quarter of a turn. It is plain, accordingly, that the mechanism should be so arranged, that the action of the arms, which shoot the bolts successively, should immediately follow the action of those fingers which raise the carrying claws successively; and therefore either a separate quarter of a turn should be appropriated to each of those movements, or if they be executed in the same quarter of a turn, the mechanism must be so constructed, that the arms which shoot the bolts successively, shall severally follow immediately after those which raise the carrying claws successively. The latter object is attained by a mechanical arrangement of singular felicity, and partaking of that elegance which characterises all the details of this mechanism. Both sets of arms are spirally arranged on their respective axes, so as to be carried through their period in the same quarter of a turn; but the one spiral is shifted a few degrees, in angular position, behind the other, so that each pair of corresponding arms succeed each other in the most regular order,—equalizing the resistance, economizing time, harmonizing the mechanism, and giving to the whole mechanical action the utmost practical perfection.
