Page:Experimental researches in chemistry and.djvu/279

From Wikisource
Jump to navigation Jump to search
This page has been proofread, but needs to be validated.
264
On the Manufacture of Optical Glass.
[1829.

shelter fixed over the furnace, either of tin plate, clean boards, or some other material which shall not throw off scales or impurities of any kind.

67. If, by any unfortunate accident, a fragment of matter does fall into the glass, it should be instantly removed. It certainly will not sink, because of the great density of the glass, and may be taken out, usually with facility, by touching it, and the glass in its neighbourhood, with the platinum stirrer (28), or the bottom of the platinum ladle (28). In carrying it and the adhering glass away, great attention should be given, that none of the latter fall over the sides of the tray; since such portion might be a means of introducing impurity hereafter, or of cementing the tray and the earthenware together in a very inconvenient and injurious manner.

68. If, also, it should be observed at this time, that there is a superabundance of glass in the tray, and not sufficient distance between its surface and the edges of the platinum, the excess should be ladled out (28), an operation easily performed, but which must be done with care.

69. When the glass is ascertained to be in a proper condition, and that there is no appearance of any portion of it outside the tray, the covers are to be replaced, the chamber closed, and the heat continued. If the tray-covers be glazed, some precaution is required in their arrangement; for on putting the second cover over the first, if they are left in contact by a portion of glazed surface, they will be found, upon their next removal, to adhere at that place. They should never be put in contact therefore with each other, or, if that cannot be avoided, a piece of old platina foil should be laid upon the place where the contact is necessary (58).

70. Whilst the glass is covered and subjected to a high temperature, there is, as before stated, an inward current of fresh air passing continually to and about it through the air-tube, during the whole time of the experiment (55).

It was necessary to apply a valve to the external orifice of this tube to regulate the supply; for the draught was so considerable, that the glass was cooled by it, and much dust carried in. Finding reason to believe that even when very much diminished, the quantity of soots and dust in a London atmosphere; and especially in that portion of it taken from an expe-